 |
 |
 |
|
The Macromatic THR-15168-36J is a repeat cycle ON Time Delay Relay. This encapsulated relay has an input voltage of 24V AC/DC. It has an adjustable time range of 10 to 1000 seconds. Time is adjusted by turning the blue dial at the top. The encasement of the unit is made for use under harsh conditions. The design is microprocessor-based to provide better functionality, and is perfect for high volume OEM applications. The internal jumper connected to pin 2 provides easier wiring.
Note: Image is for reference, actual part may differ
Specifications
- Relay Function- Repeat Cycle ON
- Mounting Style- Surface Mount with #8 or #10 Screw
- Termination- 0.25" Male Quick Connect Terminals
- Relay Timing Range- 10 - 1000 Sec
- Input Voltage- 24V AC/DC
- Output- 10 Amps SPDT
- Voltage Tolerance- AC Operation: +10/-15% of nominal at 50/60 Hz. DC Operation: +10/-15% of nominal voltage
- Load- Max. 2VA
- Setting Accuracy- Maximum Setting (Adjustable): +5%, -0% Minimum Setting (Adjustable): +0%, -50%
- Repeat Accuracy- The greater amount of +/- 0.1% or +/- 0.04 Sec
- Reset Time- 100ms
- Startup Time- 0.05 sec
- Maintain Function Time- 0.01 sec
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -45 C to 85 C (-49 F to 185 F);
- Output Contacts- 10A @ 240VAC / 7A @ 28VDC SPDT, 1/4 hp @ 120VAC (N.O.)
- Life- Mechanical: 10,000,000 operations, Full Load: 100,000 operations
- Overall Dimensions- 2" Height x 2" Width x 1.14" Depth
- Approvals- C UR US, CE
With this Repeat Cycle function, once the input voltage is introduced, the relay energizes and the ON time delay starts. After the ON time delay, the relay de-energizes for the duration of the OFF time delay. The cycle then starts over again with the ON time delay and the relay is energized. The cycle will repeat until the input voltage is taken out.
Macromatic THR Series Relay Installation Instructions
Macromatic 24V Repeat Cycle 10-1000 Second ON Time Delay Relay with Jumper THR-15168-36J
|
|
|
 |
|
 |
|
