Home > Relays > Current Sensing Relays >

Macromatic COH05A2AF Over Current Sensing Relay, 0.5-5A, 0.15-7 Sec, 120V, 3 Sec Delay

Macromatic COH05A2AF Over Current Sensing Relay
Macromatic COH05A2AF Over Current Sensing Relay, 0.5-5A, 0.15-7 Sec, 120V, 3 Sec Delay
  
Alternative Views:
Price: $87.80
Note: Ships in 10-15 Business Days. Contact us to confirm current ship date
MFG P/N: COH05A2AF
MFG: Macromatic
Weight (lbs): 0.3



Availability: In Stock
Product Code: COH05A2AF
Qty:

Description
 

The Macromatic COH05A2AF is a current sensing relay. This encapsulated relay has an input voltage of 120V AC. It is designed to monitor for over current faults and has an output of 10A SPDT. It checks AC current, with an adjustable range of 0.5-5A and a trip time delay of 0.15-7 seconds. There is a 3 second sensing time delay on startup. The built-in current transformer promotes easy access and greater sensitivity. The encapsulated casing is ideal for harsh environments. Note: Image is an approximation. Actual part may differ.

Specifications

  • Relay Function- Overcurrent
  • Current Monitor Range- 0.5-5 Amps
  • Time Trip Delay- 0.15-7 seconds
  • Sensing Time Delay on Startup- 3 Seconds
  • Input Voltage- 120V AC
  • Output- 10A SPDT
  • Input Voltage Tolerance- +10/-15% of nominal
  • Load- 2VA
  • Current Sensing- Type: Toroidal, through hole wiring
    Setting Accuracy: Min: +0%, -50%; Max: +10%, -0%
    Maximum Allowable Current: Steady-25A Turns; 150A Inrush for 10 Seconds
    Trip Point Hysteresis: -5%
  • Response Time- Time Delay on Reset (Relay OFF): 100ms
    Reset Time: 400ms
  • Operating Temperature- -28 C to 65 C (-18 F to 149 F)
  • Storage Temperature- -40 C to 85 C (-40 F to 185 F)
  • Output Contacts- 10 Amperes @ 240VAC, General Purpose; 8 Amperes @ 28VDC, Resistive; 1/4HP @ 120/240VAC; B300
  • Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
  • Mounting- Surface mount with two #6 screws
  • Termination- 0.25" male quick-connect terminals
  • Overall Dimensions- 3.5" Height x 2.5" Width x 1.5" Depth
  • Approvals- UL & CUL Recognized

The relay starts monitoring for faults once the input voltage is introduced and after the 3 second sensing start-up delay. In the event of an overcurrent situation, the AC current goes above the set Fault Trip Current for longer than the adjusted time delay. The relay energizes after the time delay on pick-up and stays energized until the current goes below the reset level. The COH05A2AF features an LED indicator which glows red to show when an overcurrent fault is detected. Has pilot duty rating. Application examples include process control, monitoring for locked rotor or load loss, or open heater or lamp.

Macromatic COH Series Relay Installation Manual

Macromatic 120V Over Current Sensing Relay with 3 Second Delay COH05A2AF



Kacon KSC-5060ZDHF Three Phase Solid State Relay w/ Fan, 24V DC Input, 90-480V AC Load, 60A $500.12
ILME CKM-04N CK Series Insert, Male, Size 21.21, 4 Pin, 10A, Black $6.89
Euri Lighting EP30-11W5040CECS-2 11W PAR30 Short Neck LED Spot Light, 4000K, 2 Pack $12.14
HTP M30 3 Wire Proximity Sensor, 15mm Range, 10-30V DC, NPN Closed, Nickel Plated Brass $94.98
Mencom MDE45P-8MP-2M Ethernet Cordset, 8 Pole, Male, 2 Meter, PUR $72.91
Z+F V30AE009050 Non-Insulated End Sleeve, 18 AWG, 0.24" Length $0.02
Jorc 2611 230V AC OPTIMUM Timer Controlled Drain, 1/4" NPT, 0-230 PSI, Steel Valve $331.20
Mencom MCG-21 PG 21 .512-.708" (13-18mm) Cable Gland $15.12
DuraChoice PB204L-K15 Oil Filled Pressure Gauge, 2" Dial, 1/4" NPT, 0-15000 PSI $13.08