 |
Meltric 33-38075 DS30 Male Inlet: 125V AC, 30A, 1 Pole + Neutral + Ground
Switch-rated Meltric DS30 male inlet for industrial power connections. Rated for 125V AC, 30 amps, and 1 pole + neutral + ground, with silver-nickel contacts, a fiberglass-reinforced thermoplastic housing, screw terminals, and Type 3R/IP54 environmental protection.
✅ Built for Industrial Disconnect Applications
The Meltric 33-38075 DS30 male inlet supports branch-circuit and motor-circuit disconnect switching in industrial power systems. Its 125V AC configuration and 1 pole + neutral + ground arrangement make it suitable for equipment connections where the voltage, conductor arrangement, and matching female receptacle are verified before installation.
Use this inlet for machinery, motor loads, control panels, portable equipment, and facility power connections that require a durable 30A interface. Confirm the mating device has the same voltage and contact configuration.
Reliable 30A Power Connection with Switch-Rated Performance
The Meltric 33-38075 DS30 male inlet combines a compact panel-mounted connection point with ratings for branch-circuit and motor-circuit disconnect switching. Its 1.5 hp horsepower rating supports properly matched motor applications, while the 100kA close-and-withstand short-circuit rating helps meet demanding industrial power requirements.
Silver-nickel contacts provide a conductive, oxidation-resistant mating surface for repeated connection cycles. The blue fiberglass-reinforced thermoplastic polyester body resists impact, chemicals, and ultraviolet exposure, making the inlet a practical choice for harsh indoor or protected outdoor environments.
⚡ Switch-Rated Connection
Rated for branch-circuit and motor-circuit disconnect switching in AC power applications
🛡️ 100kA Short-Circuit Rating
Close-and-withstand rating supports demanding industrial electrical systems
🔩 Silver-Nickel Contacts
85% silver and 15% nickel contact material combines conductivity with wear resistance
🏭 IK09 Housing
Impact-resistant, fiberglass-reinforced body withstands chemicals and UV exposure
Key Features & Benefits
- DS30 Male Inlet: Provides a fixed 30A connection point for a compatible Meltric female receptacle
- Disconnect Switching: Supports branch-circuit and motor-circuit switching without requiring a separate routine disconnect at the connection point
- Wide Operating Range: Rated from -40°F to 140°F (-40°C to 60°C)
- Flexible Field Wiring: Screw terminals accept 14-4 AWG conductors
- Verified Compliance: UL listed and CSA certified for approved installations
Specifications
| Part Number | 33-38075 |
|---|
| Brand | Meltric |
|---|
| Series | DS30 |
|---|
| Product Type | Male Inlet |
|---|
| Rated Voltage | 125V AC |
|---|
| Rated Current | 30 Amps |
|---|
| Polarity | 1 Pole + Neutral + Ground |
|---|
| Horsepower Rating | 1.5 hp |
|---|
| Switch Rating | Branch Circuit & Motor Circuit Disconnect Switching (AC Only) |
|---|
| Short-Circuit Rating | 100kA Close & Withstand |
|---|
| Wiring Capacity | 14-4 AWG |
|---|
| Terminal Type | Screw |
|---|
| Contact Material | Silver-Nickel (85% Silver, 15% Nickel) |
|---|
| Housing Material | Fiberglass-Reinforced Thermoplastic Polyester |
|---|
| Overall Dimensions | 3.03" Diameter × 2.8" Depth |
|---|
| Temperature Range | -40°F to 140°F (-40°C to 60°C) |
|---|
| Impact Rating | IK09 |
|---|
| Environmental Rating | Type 3R, IP54 |
|---|
| Listings | UL, CSA |
|---|
📦 What's Included
• (1) Meltric 33-38075 DS30 male inlet
• Ground shipping only
Product image note: The displayed image is for reference. The actual product configuration may differ.
🔎 Selection Checklist
Voltage: 125V AC
Current: 30A
Polarity: 1 Pole + Neutral + Ground
Match all three values to the female receptacle and the electrical system before ordering.
🔧 Installation Notes
Use qualified personnel: Install and wire the inlet in accordance with applicable electrical codes and the equipment manufacturer's instructions.
Verify conductor size: Screw terminals accept 14-4 AWG wiring. Select conductor size for the load and installation conditions.
Confirm the mating device: Use a compatible Meltric female receptacle with the same voltage and polarity configuration.
📄 Meltric DS Series User Manual
Review the DS Series user manual for installation, operation, and maintenance guidance.
|
|
|
