 |
Hirschmann GDM 3009 J Form A DIN 43650 Connector, 3 Poles + Ground, PG 9
Hirschmann GDM 3009 J Black rectangular connector for DIN 43650 / ISO 4400 (EN 175301-803) Form A interfaces. This PG 9 connector provides 3 poles + ground, 18 mm contact spacing, screw termination, and an IP65 environmental rating for dependable industrial valve and sensor wiring.
✅ DIN Form A Connection for Industrial Equipment
The GDM 3009 J Black is designed for equipment using the DIN 43650 / ISO 4400 (EN 175301-803) Form A interface with 18 mm contact spacing. Its 3-pole-plus-ground configuration supports applications that require an additional electrical contact beyond a typical 2-pole valve connection. Verify the mating interface, wiring arrangement, voltage, current, and cable diameter before installation.
Rugged Hirschmann GDM Connector for Demanding Field Wiring
The Hirschmann GDM 3009 J Black provides a durable, hardwired connection for hydraulic, pneumatic, and electromagnetic equipment. Its fiberglass-reinforced polyamide housing, central screw locking system, and IP65 protection help maintain a secure connection around solenoid valves, pressure sensors, flow controllers, and other industrial control devices exposed to vibration, dust, or water spray.
A large pin-plate wiring area and patent-protected combination terminals simplify conductor installation. The terminals accept stranded wire and can also accommodate fork-type cable lugs or ring eyelets, while the PG 9 entry is sized for cable with a 4.5 to 7 mm outside diameter. The connector includes the center screw and NBR flat gasket needed to complete the assembly.
🔌 3 Poles + Ground
Form A connector with 18 mm contact spacing for compatible multi-contact industrial equipment
🧰 Flexible Termination
Combination terminals support stranded conductors, fork-type cable lugs, or ring eyelets
💧 IP65 Protection
Dust-tight construction resists water jets when correctly assembled with a suitable cable and gasket
⚡ 16 Amp Capacity
Rated for industrial power and control connections up to 16 amps within specified voltage limits
Key Features & Benefits
- DIN Form A Interface: Fits compatible DIN 43650 / ISO 4400 (EN 175301-803) equipment with 18 mm contact spacing
- Three Poles Plus Ground: Supports applications that need an additional contact while retaining a protective ground connection
- PG 9 Cable Entry: Accepts cable with a 4.5 to 7 mm outside diameter for a properly matched entry seal
- High-Load Construction: Fiberglass-reinforced polyamide housing is designed for demanding industrial field service
- Vibration-Resistant Locking: Central M3 screw secures the connector to the mating device
- Combination Terminals: Accept stranded wire, fork-type cable lugs, or ring eyelets for installation flexibility
- IP65 Protection: Helps protect the connection from dust and water jets when correctly assembled
- Broad Industrial Approvals: Listed with UR, VDE, SEV, CSA, CE, and RoHS approvals
Specifications
| Part Number |
GDMZRB390370 |
| Hirschmann Order Code |
932214-100 + 730801-002 |
| Brand / Model |
Hirschmann GDM 3009 J Black |
| Connector Standard |
DIN 43650 / ISO 4400 (EN 175301-803) Form A |
| Number of Poles |
3 poles + ground |
| Contact Spacing |
18 mm |
| Housing |
Black fiberglass-reinforced polyamide |
| Contact Type |
Screw termination, cable shoe, or cable eye |
| Cable Entry |
PG 9 (4.5 to 7 mm cable OD) |
| Maximum Conductor Size |
16 AWG |
| Housing Dimensions |
34.2 mm H x 51 mm L x 27.5 mm W |
| Electrical Rating |
Up to 400 VDC; nominal rating 250 VAC / 16 A |
| Center Screw |
M3 x 35 mm nickel-plated brass center screw |
| Gasket |
GDM 3-7 flat NBR/Buna-N gasket |
| Operating Temperature |
-40°F to +257°F |
| Protection Class |
IP65 |
| Approvals |
UR, VDE, SEV, CSA, CE, RoHS |
| Contact Resistance |
≤ 4 mΩ |
| Contact Surface |
Tin (Sn) |
| Flammability Class |
Housing: 94 HB; contact bearer: 94 V-0 |
📦 What's Included
• (1) Hirschmann GDM 3009 J Black connector
• (1) M3 x 35 mm nickel-plated brass center screw
• (1) GDM 3-7 flat NBR/Buna-N gasket
🏭 Typical Applications
This Hirschmann Form A connector is suited to compatible hydraulic, pneumatic, and electromagnetic systems where a secure field-wired connection is required. It is commonly applied to solenoid valves and sensors, and its rugged construction also supports control equipment installed on machinery, conveyors, heating systems, and other vibration-prone industrial assemblies.
🔧 Installation Notes
Match the cable diameter: Use cable with a 4.5 to 7 mm outside diameter so the PG 9 entry can seal correctly.
Confirm the pin arrangement: Verify that the mating device requires 3 poles plus ground with 18 mm spacing.
Review the drawings: See the product images for dimensional and wiring details before installation.
|
|
|
