This Sealcon M16 male signal rear mount panel connector with flange features an 18 pin insert for 0.8 mm contacts. The housing is nickel plated brass with brass alloy contacts. The housing can accept 2-7 mm cable. Rated IP67 / IP69K. Comes un-assembled with separate housing, insert, and crimp contacts.
Note: Image is for reference, actual product may differ
- No tools needed to insert or remove contacts
- Euro-Lock keeps contacts in position
- EMI shielding
- Features strain relief
Includes:
- Housing - (1) 2-7 mm (.08"-.28") Cable O.D. (P/N S7.847.300.000)
- Insert - (1) 18 pin, 3 A, 24V, for crimp contacts (P/N S7.003.988.101)
- Contacts - (18) 28-22 AWG 0.8 mm Crimp Pins (P/N S7.010.980.801)
Specifications
- Housing - Nickel Plated Brass
- Housing Dimensions- 1.81" Length x 0.78" Width x 0.78" Height
- Insert - PBT
- Contacts - Brass Alloy
- Contact Surface - Gold Plated Nickel
- Orientation - Male
- Cable Range - 2 - 7 mm (.08"- .28")
- Contacts - 18
- Crimp Wire Gauge - 28-22 AWG
- Operating Temperature - -40 F to 257 F (-40 C to 125 C).
- Nominal Current - 3 Amps
- Nominal Voltage - 24V
- Min. Mating Cycles- >1000
- Insulation Resistance - >10^10 MOhm
- Max. Contact Resistance - 3 mOhm
- Mating Thread - M16
- Type of Connection - Crimp Contact
- IP Protection - IP 67 / IP 69 K
Housing, insert, and crimp contacts can be sold separately. Custom configurations are also available. Contact us at 800-966-2345 for more info.
