Home > EternaBond RoofSeal Tape >

EternaBond RSG-8-50 8" x 50' Gray RoofSeal Sealant Tape

EternaBond RoofSeal
EternaBond RSG-8-50 8" x 50' Gray RoofSeal Sealant Tape
  
Alternative Views:
Price: $143.80
Note: Call for Availability
MFG P/N: EB-RG080-50R
MFG: EternaBond
Weight (lbs): 8



Availability: Out of Stock
Product Code: RSG-8-50
No Longer Available

Description
 

The EternaBond RSG-8-50 RoofSeal leak repair tape is gray with a 50 foot length and an 8 inch width. Total thickness is 35 mil. RoofSeal's UV stable backing lets be used in applications that receive a lot of sun. It has a high elongation factor, so it can expand or contract along with changing conditions.

  • Easy installation, only a small amount of surface prep needed
  • Liquid tight seal
  • UV protected
  • High elongation factor
  • Can stick to itself & fit around objects
  • Adhesive has silicone lining to prevent tape from sticking before application
  • Perfect for roof & leak repair, land-fill or pond linings, skylights, gutters, and seam repair
  • Uses MicroSealant Technology - 100% solids formulation consisting of synthetic resins, thermoplastics and noncuring rubber with a built-in primer
  • Works on EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, aluminum, galvanized steel, wood, most plastics, fiberglass, brick, concrete, and other kinds of roofing material

Specifications

  • Roll Size: 8" x 50'
  • Color: Gray
  • Adhesion: 20 lbs+ /in width
  • Application Temperature: -20 F to 150 F ambient
  • Elongation: > 700% +/- 100
  • Low Temperature Flexibility: 1/2" radius at -30 F
  • Flexibility Temperature Range: -70 F to >200 F
  • Permanence: 0.001 perms max.
  • Pliability: No cracks in membrane
  • Shelf Life: Up to 5 years
  • Tensile Break PSI: 4500 PSI +/- 500 PSI
  • Total Thickness: 35 mil +/- 2 mil
  • Water Vapor Test: 0.005 grms/100" sq./24hrs/100 F

EternaBond RoofSeal Downloads

EternaBond RSG-8-50 Sealant Tape
Additional Product Information

Installation

The area should be dry and free from debris or other substances before RoofSeal can be applied. Remove the lining as the tape is being applied to prevent mistakes and keep the tape from coming into contact with other surfaces or objects. Pressure should be applied to set up the bonding process and remove any air bubbles. This can be done with your hand, although a steel roller provides the best results. If the ambient temperature is 40 F to -20 F, the surface should be treated with EternaPrime surface conditioner before applying.

RoofSeal Data Sheet



ILME CAV-06LG29 C-Type Metallic Hood, Size 44.27, PG 29, Single Lever $51.49
Menics MS70S-G10-B 70mm Xenon Strobe Beacon Light, 110V, Blue, Surface Mount $69.34
Kacon T22-371BA2 22 mm Blue Maintained Push Button, SPDT, 110/220V AC LED $39.13
Mencom CRB-M25 M25 Cable Gland Plug, Nickel Plated Brass $4.13
Euri Lighting EA19-9W5000CEC-2 9W A19 LED Light, 3000K, Set of 2 $6.39
Menics MS70M-PB00-RYG 70mm LED Beacon Light, 12-24V, Red Yellow Green, Steady, Pole Mount, w/ Alarm, Clear Lens $111.51
Menics MQVL-FF-B 95 mm Cube Beacon Light, 110-220V, Blue $120.94
Mueller BU-31602-0 Black Pressfit Insulated Banana Jack w/ Solder Pin $3.38
Macromatic THR-16166-33J Encapsulated Time Delay Relay, Delayed Interval, 12V, 1-100 Min, Internal Jumper $31.64