Home > EternaBond RoofSeal Tape >

EternaBond RSG-8-50 8" x 50' Gray RoofSeal Sealant Tape


EternaBond RoofSeal
EternaBond RSG-8-50 8" x 50' Gray RoofSeal Sealant Tape
 
Alternative Views:


Price: $143.80
Note: Call for Availability
MFG P/N: EB-RG080-50R
MFG: EternaBond
Weight (lbs): 8



Availability:
Out of Stock
Product Code: RSG-8-50
No Longer Available

Description
 

The EternaBond RSG-8-50 RoofSeal leak repair tape is gray with a 50 foot length and an 8 inch width. Total thickness is 35 mil. RoofSeal's UV stable backing lets be used in applications that receive a lot of sun. It has a high elongation factor, so it can expand or contract along with changing conditions.

  • Easy installation, only a small amount of surface prep needed
  • Liquid tight seal
  • UV protected
  • High elongation factor
  • Can stick to itself & fit around objects
  • Adhesive has silicone lining to prevent tape from sticking before application
  • Perfect for roof & leak repair, land-fill or pond linings, skylights, gutters, and seam repair
  • Uses MicroSealant Technology - 100% solids formulation consisting of synthetic resins, thermoplastics and noncuring rubber with a built-in primer
  • Works on EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, aluminum, galvanized steel, wood, most plastics, fiberglass, brick, concrete, and other kinds of roofing material

Specifications

  • Roll Size: 8" x 50'
  • Color: Gray
  • Adhesion: 20 lbs+ /in width
  • Application Temperature: -20 F to 150 F ambient
  • Elongation: > 700% +/- 100
  • Low Temperature Flexibility: 1/2" radius at -30 F
  • Flexibility Temperature Range: -70 F to >200 F
  • Permanence: 0.001 perms max.
  • Pliability: No cracks in membrane
  • Shelf Life: Up to 5 years
  • Tensile Break PSI: 4500 PSI +/- 500 PSI
  • Total Thickness: 35 mil +/- 2 mil
  • Water Vapor Test: 0.005 grms/100" sq./24hrs/100 F

EternaBond RoofSeal Downloads

EternaBond RSG-8-50 Sealant Tape

Additional Product Information

Installation

The area should be dry and free from debris or other substances before RoofSeal can be applied. Remove the lining as the tape is being applied to prevent mistakes and keep the tape from coming into contact with other surfaces or objects. Pressure should be applied to set up the bonding process and remove any air bubbles. This can be done with your hand, although a steel roller provides the best results. If the ambient temperature is 40 F to -20 F, the surface should be treated with EternaPrime surface conditioner before applying.

RoofSeal Data Sheet




Macromatic THR-14161-04J Encapsulated Time Delay Relay, On/Off Delay, 240V, 0.05-5 Sec, Internal Jumper $33.05
AerosUSA 1731020316 SPP 2X8G Insert for Cable Entry Frame, 2 Hole, 0.31", Set of 10 $24.44
Cable Tie Express 1-4-N-100 2" Cable Tie Mounting Bases, 4-Way Entry, Rubber Adhesive, Natural, Bulk Pack of 100 $86.07
Sealcon SM-50-HD M50 Fiber Reinforced Plastic Seal Ring $7.66
Sealcon NM-40-BE M40 EMI/RFI Proof Locking Nut $11.74
BreezEV EVC-L2-ACC-TESTER-J1772 Level 2 EV Charger Tester $322.14
IMO LPS-1-090-12DC High Performance DIN Rail Power Supply, 90W, 12VDC, 7.5A, Single Phase $103.14
Lumberg Automation 0980 ESL 399-121 4 Input / 4 Output / 8 IO-Link Master M12 Distribution Block, L-Coded Power $540.02
Sealcon DUO22MA-BR M20 DUO Ms .39" - .55" (10 - 14 mm) Conduit Fitting, Fits Size 14 $20.83