Mencom PG11-3X4 three hole insert for select PG 11, 3/8" NPT, or M16 strain relief fittings. Hole diameter 0.157" (4 mm). One cord grip can then be used for multiple wires or cables. Wire and cable diameters should be within 0.02" of the hole diameter for an ideal fit. Sold Individually. Note: Image is for reference, actual part may differ

Specifications

Thread Size / Type- 3/8" NPT, PG 11, M16
Number of Holes- 3
Hole Diameter- 0.157" (4 mm)
Material- Black Plastic
IP Rating- IP 65 (provided there is an ideal fit)

Fits

MCG-11
MCG-11R
PCG-11
PCG-11-B
PCG-11R
PCG-11R-B
PCG-3/8
PCG-3/8-B
PCG-3/8R
PCG-3/8R-B
PCG-M16
PCG-M16-B
PCG-M16R
PCG-M16R-B

Mencom PG 11, 3/8" NPT, & M16 3 Hole 4 mm Strain Relief Fitting Insert

	Macromatic THR-14161-04J Encapsulated Time Delay Relay, On/Off Delay, 240V, 0.05-5 Sec, Internal Jumper $33.05
	AerosUSA 1732052412 DES-PM 24/12G Cable Entry Plate, 12 15mm Entries $13.82
	Mencom MCVP-19FP-10M M23 Cordset, 19 Pole, Female, 1/10 Amp, 10 m $259.78
	Euri Lighting EM16-7W4000EW 7W MR16 LED Spot Light, 3000K $4.12
	Sealcon S7.010.942.001 Crimp Pin for M23 Power Connectors, 2mm, 18-14 AWG $2.29
	Sealcon SM-20-HD M20 Fiber Reinforced Plastic Seal Ring $0.89
	Seifert 42711001 120V 3020 BTU SlimLine Control Cabinet Air Conditioner $2,834.53
	Sealcon CD16CR-GY Gray PG 16 Dome .28" - .47" (7 - 12 mm) O.D. Elongated Cord Grip $2.72

Mencom PG11-3X4 PG 11, 3/8" NPT, & M16 3 Hole 0.157" (4 mm) Insert

Mencom PG 11, 3/8" NPT, & M16 3 Hole 4 mm Strain Relief Fitting Insert