 |
 |
 |
|
AerosUSA 1731020416 SPP 2X8B DES Cable Entry Insert: 2 entries, 0.31" (8mm)
Compact split cable-entry grommet for AerosUSA DES frames. The black TPE insert seals 2 cables with a 0.31" (8mm) outside diameter and allows preterminated cables to pass through an enclosure without removing their connectors.
✅ Designed for AerosUSA DES Cable Entry Frames
The SPP 2X8B small-size insert slides into a compatible DES cable entry frame and can be exchanged with other SPP inserts as cable requirements change. Its split design supports cables that already have connectors attached, helping simplify control-panel, machinery, and enclosure wiring.
Compact Cable Routing for Preterminated Connections
The AerosUSA 1731020416 SPP 2X8B insert provides 2 precisely sized cable entries for 0.31" (8mm) cables. Installers can route multiple conductors through a single DES frame position while keeping connectors intact, which reduces retermination work during panel assembly, machine retrofits, and maintenance.
The oil-resistant, UV-resistant Black TPE (thermoplastic elastomer) construction is halogen- and silicone-free. When correctly installed as part of the DES system, the insert supports IP66 protection against dust and powerful water jets. Inserts are packaged in quantities of 10 and are sold separately from the cable entry frame.
✂️ Split Insert Design
Route cables with connectors already attached, without cutting or reterminating the cable.
🧩 Modular DES Fit
Slides into a compatible DES frame and can be exchanged with other SPP inserts.
💧 IP66 System Protection
Supports dust-tight, water-jet-resistant performance when used in a properly installed DES system.
🏭 Industrial TPE
Oil- and UV-resistant material is halogen-free and silicone-free for industrial installations.
Key Features & Benefits
- 2 Cable entries: Sized for cables with 0.31" (8mm)
- Industrial Resistance: Resists oil and ultraviolet exposure
- Material Composition: Halogen-free and silicone-free Black TPE (thermoplastic elastomer)
- System Sealing: Supports IP66 protection when used with the DES system
- Pack Quantity: Sold in packs of 10 inserts
Specifications
| Part Number | 1731020416 |
|---|
| Brand | AerosUSA |
|---|
| Series / Model | SPP 2X8B |
|---|
| Insert Size | Small |
|---|
| Housing Material | Black TPE (thermoplastic elastomer) |
|---|
| Cable Entries | 2 |
|---|
| Cable Diameter | 0.31" (8mm) |
|---|
| Temperature Range | -40 C to 110 C (-40 F to 230 F) |
|---|
| Dimensions | 1.01" Width x 1.03" Height x 0.98" Depth |
|---|
| Flammability Rating | UL 94 V0 |
|---|
| Ingress Protection | IP 66 (Total protection from dust and high pressure water jets from any direction) when used with DES system |
|---|
| Approvals / Compliance | NEMA 4X (indoor use), C UR US, Ecolab, RoHS Compliant |
|---|
| Package Quantity | 10 inserts |
|---|
📦 Package Contents
• (10) AerosUSA SPP 2X8B small-size inserts
• Cable entry frame is not included and is sold separately
📏 Confirm Cable Size Before Ordering
Choose SPP 2X8B when the installation needs 2 0.31" (8mm) cable passages in a black insert. Measure each cable's outside diameter before selecting the insert.
🔧 Installation Notes
Open the split insert: Position it around each cable without removing the attached connector.
Seat each cable: Make sure every cable matches the specified 0.31" (8mm) diameter.
Install in the frame: Slide the insert fully into a compatible DES frame position to support the stated system protection.
⚙️ Typical Applications
Control panels: Organize preterminated sensor, actuator, and communication cables
Machine enclosures: Add or replace cable passages without connector removal
Compact routing: Route 2 small-diameter cables through one DES frame position
|
|
|
 |
|
 |
|
