Menics PMEF-102-R 1 Stack LED Tower Light, 45mm Dia., 24V

Menics PMEF-102-R 1-Tier Red 24V AC/DC Steady/Flashing LED Tower Light

45 mm Menics PME Series LED tower signal light with 1 tier, red indication, 24V AC/DC power, and steady and flashing light operation without a buzzer. Prism-cut lenses, modular construction, a pre-assembled lead, and vibration-absorbing rubber support reliable equipment-status indication.

✅ Single-Tier Red Steady/Flashing Configuration

The PMEF-102-R is a single-tier red LED signal light with both steady and flashing modes. It does not include a buzzer, making it a dedicated visual indicator in the compact 45 mm PME Series format.

Menics PMEF-102-R PME Series LED Tower Signal Light

The Menics PMEF-102-R is a 24V red single-tier LED tower light with steady and flashing operation for applications that need a direct visual status signal.

A prism-cut red lens helps distribute the LED output evenly, and the silver accent band defines the signal section. The modular PME Series construction is pre-assembled and incorporates vibration-absorbing rubber for demanding equipment environments.

⚡ Steady + Flashing Modes

One LED tier supports both continuous illumination and flashing operation for two distinct visual signaling behaviors.

💡 Prism-Cut Lens

The prism-cut red lens helps distribute LED light more evenly across the signal surface.

🧩 Modular PME Design

Modular construction makes individual components easier to change if maintenance or replacement is needed.

🛠️ Vibration-Absorbing Build

Internal vibration-absorbing rubber supports use on operating equipment where vibration is present.

Key Features & Benefits

Two Visual Operating Modes: Select steady illumination or flashing operation from the same single-tier signal light.
Dedicated Red Indication: A single colored lens provides a focused visual signal without additional stacked colors.
No Integrated Buzzer: Designed for applications where visual signaling is needed without an audible alarm.
Even Light Distribution: The prism-cut lens helps spread the LED output across the signal area.
Service-Friendly Construction: PME Series modular construction makes component changes easier when required.
Pre-Assembled Wiring: The tower is supplied assembled with its lead attached for installation.

Specifications

Part Number	PMEF-102-R
Brand	Menics
Series	PME
Tower Diameter	45 mm
Light Operation	Steady & Flashing
Power Supply	24V AC/DC
Current Consumption	0.03 Amps
LED Color	Red
Number of LED Tiers	1 Stack
Brightness	10 Lumens, 800 mcd
Buzzer	None
Flashing Rate	80 times per minute
Lead Length	25"
Lens Material	Polycarbonate Resin
Housing Material	ABS Plastic Resin
Dimensions (Tower Light Only)	127 mm Height x 45 mm Diameter (5" x 1.77")
Vibration	3 mm @10~55Hz
Ambient Temperature	-15 C to 40 C (5 F to 104 F)
Ambient Humidity	45-85% Relative Humidity
Recommended Wire Size	1007 UL / 22 AWG
IP Protection	IP 52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
Approvals	CE, RoHS

📦 Mounting Options

Pole Mount: Pole + base

Wall Mount: Pole + wall bracket

Surface Mount: 22 mm pole (MAP-0022) + base, or threaded 43 mm pole (MAP-M043) installed through a pre-drilled hole and secured with lock nuts.

⚠️ Lead Length Note

If a 750 mm or 1000 mm mounting pole is used, a longer lead is required. The lead can be modified during installation or ordered with a factory modification upon request.

🔧 Mounting Accessory Guide

Use the Menics Signal Light Mounting Accessory Chart to identify compatible poles, bases, and wall-mount components for this tower light.

📋 Model Selection Note

Choose this model when a single red visual signal is required with both steady and flashing operation. This PMEF configuration has no buzzer; select a buzzer-equipped PME model if an audible warning is also required.

Menics PMEF-102-R 45 mm 1 Stack LED Tower Light, Red, Flashing, 24V