 |
 |
 |
|
GardTec SC1000-W2 254mm Fan Guard
254 mm GardTec wire form fan guard with 9-ring C1008 steel construction, bright nickel chrome plating, rounded edges, high airflow efficiency, and added protection for cooling fan blades.
Why Choose the GardTec SC1000-W2 Fan Guard?
The GardTec SC1000-W2 is a 254 mm wire form fan guard designed for 254 mm cooling fans. Its rounded wire design helps protect fan blades from fingers and large debris while allowing air to move through the guard with minimal restriction.
This 4-position fan guard uses C1008 Steel with bright nickel chrome plating and a 9-ring layout. For applications where heat dissipation, airflow, and noise control matter, the wire form design supports up to 95% efficiency and can provide 23-30% greater airflow than many sheet metal guards.
🌀 254 mm Fan Guard
Designed to match 254 mm cooling fans in equipment, cabinets, and electronic enclosures
🌬️ High Airflow Design
Rounded wire edges help maintain airflow while reducing excess restriction
🛡️ Blade Protection
Helps keep fingers and large debris away from moving fan blades
🔩 9-Ring Construction
C1008 steel guard with bright nickel chrome plating for durable fan protection
⚠️ Confirm Fan Size Before Installation
Select a wire form guard that matches the cooling fan size and mounting pattern. Always turn equipment off and unplug the power source before installing, removing, or replacing a cooling fan guard.
📋 Fan Guard Selection Notes
Wire form fan guards help protect cooling fans without blocking the airflow needed for heat removal. Choose the guard by fan size, ring layout, mounting position, and airflow requirements. The GardTec SC1000-W2 is made for 254 mm fans and uses rounded wire edges to help reduce restriction and noise.
Key Features & Benefits
- Designed for 254 mm cooling fans
- 9-ring guard layout with 4 mounting positions
- C1008 Steel construction with bright nickel chrome plating
- 2.3mm ring diameter and 2.3mm rib diameter
- Rounded wire edges help support direct airflow through the guard
- Helps reduce the risk of fingers or large debris contacting moving fan blades
- Supports efficient heat removal with minimal airflow loss
- Helps limit objectionable background noise compared with restrictive guard designs
- Useful for cooling fans in equipment, electronics, cabinets, and machinery
Technical Specifications
|
Brand
|
GardTec
|
|
Model Number
|
SC1000-W2
|
|
Product Type
|
Wire Form Fan Guard
|
|
Fan Guard Size
|
254 mm
|
|
Fan Guard Material
|
C1008 Steel
|
|
Plating
|
Bright Nickel Chrome
|
|
Ring Diameter
|
2.3mm
|
|
Rib Diameter
|
2.3mm
|
|
Mounting Positions
|
4
|
|
Number of Rings
|
9
|
|
Airflow Improvement
|
23-30% greater airflow than many sheet metal guards
|
|
Efficiency Rating
|
Up to 95%
|
📋 Basic Installation Overview
1. Confirm Fan Size: Verify that the guard size and mounting positions match the cooling fan before installation.
2. Shut Down Equipment: Turn off and unplug the equipment so the fan cannot start during installation.
3. Align the Guard: Position the wire form guard over the fan opening with the rings centered over the blades.
4. Secure the Mounting Points: Attach the guard using the correct screws or hardware for the fan and enclosure.
5. Inspect Clearance: Confirm that the fan blades spin freely and do not contact the guard before returning the equipment to service.
|
|
|
 |
|
 |
|
