 |
 |
 |
|
Saginaw SCE-1008CHNFSS 304 Stainless Steel Continuous Hinge Enclosure: 10.13" H x 8" W x 4" D
NEMA 4X stainless steel electrical enclosure with a #4 brushed finish, continuous hinge, oil- and water-resistant gasket, and IP66 protection. Designed for junction, terminal, and industrial control applications in washdown or corrosive environments.
✅ Built for Washdown and Corrosive Industrial Environments
The Saginaw Control & Engineering SCE-1008CHNFSS protects electrical connections and control components where moisture, oil, dust, or corrosive conditions may be present. Its 304 stainless steel construction and environmental ratings make it suitable for use as an industrial junction box, terminal enclosure, or compact control enclosure.
Durable Stainless Steel Protection with Convenient Continuous-Hinge Access
This continuous hinge enclosure is fabricated from 0.063" thick 304 stainless steel and finished with a #4 brushed surface. Continuously welded seams are ground smooth to support a clean exterior and dependable environmental protection. The enclosure measures 10.13" H x 8" W x 4" D (257.302 mm x 203.2 mm x 101.6 mm), providing a compact housing for terminals, relays, wiring connections, and control devices.
A full-length stainless steel hinge supports dependable door alignment and repeated access. The door is secured by exterior screw clamp, while the oil- and water-resistant gasket helps seal the interior. Welded rear mounting provisions, a door ground stud, and included subpanel standoffs simplify integration into industrial equipment. Subpanels are sold separately.
🛡️ 304 Stainless Steel
Corrosion-resistant 0.063" stainless steel construction with a professional #4 brushed finish
🚪 Continuous-Hinge Access
Full-length hinge construction supports stable alignment and convenient access to installed components
💧 NEMA 4X & IP66
Rated for demanding indoor and outdoor environments when installed according to applicable instructions
🔩 Installation Ready
Includes a door ground stud, subpanel standoffs, and welded rear mounting provisions
Key Features & Benefits
- 0.063" Material Thickness: Provides a durable housing for electrical and electronic components
- #4 Brushed Finish: Creates a clean, uniform stainless steel surface
- Continuously Welded Seams: Welds are ground smooth for a finished exterior and reliable enclosure integrity
- Secure Door Closure: Exterior screw clamp holds the gasketed door closed
- Oil- and Water-Resistant Gasket: Helps protect the enclosed equipment from environmental exposure
- Subpanel Standoffs Included: Supports optional internal panel installation; subpanels are sold separately
Specifications
| Part Number | SCE-1008CHNFSS |
|---|
| Brand | Saginaw Control & Engineering |
|---|
| Enclosure Type | Continuous hinge electrical enclosure |
|---|
| Material | 304 stainless steel |
|---|
| Material Thickness | 0.063" |
|---|
| Finish | #4 brushed |
|---|
| Dimensions | 10.13" H x 8" W x 4" D |
|---|
| Metric Dimensions | 257.302 mm x 203.2 mm x 101.6 mm |
|---|
| Hinge | Continuous stainless steel hinge |
|---|
| Door Closure | Exterior screw clamp |
|---|
| Gasket | Oil and water resistant |
|---|
| NEMA Ratings | Type 3R, 4, 4X, 12, and 13 |
|---|
| UL Listed Ratings | Type 3R, 4, 4X, and 12 |
|---|
| CSA Ratings | Type 4, 4X, and 12 |
|---|
| IEC Rating | IEC 60529, IP66 |
|---|
📦 Included Enclosure Features
• Gasketed continuous-hinge enclosure and door
• Subpanel mounting standoffs; subpanel sold separately
• Ground stud on the door
• Welded rear mounting provisions
⚠️ Environmental Rating Note
The enclosure meets NEMA Type 3R, 4, 4X, 12, and 13 requirements; UL Listed Type 3R, 4, 4X, and 12 requirements; CSA Type 4, 4X, and 12 requirements; and IEC 60529 IP66 requirements.
Special instructions apply to maintain the Type 3R environmental rating. Refer to the instructions located on the enclosure door before installation.
🔧 Installation Notes
Plan component layout: Select an appropriately sized optional subpanel for mounted controls, relays, terminals, or other equipment.
Maintain the seal: Use properly rated cable-entry hardware and follow the door instructions to preserve the required environmental protection.
Bond the door: Use the provided ground stud as part of the enclosure grounding and bonding plan.
🏭 Typical Industrial Applications
Use the SCE-1008CHNFSS as a junction box for protected wire splices, a terminal enclosure for field connections, or a compact control box for industrial electrical components. Its stainless steel body is especially useful where regular washdown or corrosive exposure would make a painted steel enclosure less suitable.
Use the Industrial Enclosure & Junction Box Selector
|
|
|
 |
|
 |
|
