|
|
|
|
The Fandis FF12AF Series fan is a 150mm, 115Vac Gray Fan Filter Assembly. It has the ability to move air at a rate of 30 CFM, with a power consumption of 16/15W. It has an expected lifespan of 57,000 hrs and a noise level of 46/49 decibels(a). The FF series is designed to be an updated improvement to the older FPF series, which includes installation and structural enhancements. Storage temperature: -40 C to 70 C (-40 F to 158). UL Approved.
- Mounting without screws in square openings as indicated in the cut-out diagram - plate thickness between 1.3 and 3.2 mm. Note: possible attachment with screws for thicker cabinets (not supplied)
- Plastic parts in ABS/PC alloy
- Color RAL 7035 Gray
- Permanent sealing gasket in polyurethane foam
- Filter media in thermo-linked progressive structure synthetic fiber
- Airflow from outside to inside of cabinet
- IP54 standard protection degree
- UL E237844, CE, CSA approved
Fandis FF Series Fan Filter Assembly Downloads
Specifications
Voltage
|
Frequency
|
Rated Current
|
Rated Power
|
Max Air Flow
|
Static Pressure
|
Noise
|
Weight
|
Rated Temp Range
|
Life
|
(V)
|
(Hz)
|
(mA)
|
(W)
|
(m3/h)
|
CFM
|
(Pa)
|
dB(a)
|
(lbs)
|
(Kg)
|
(F)
|
(C)
|
(hours)
|
115 a.c.
|
50/60
|
200/180
|
16/15
|
45/50
|
30
|
55/62
|
46/49
|
2
|
0.80
|
14 to 131
|
-10 to +55
|
57,000
|
Fandis FF12A115UF 150 x 150 mm Gray Fan Filter
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Product Information
This fan filter is made to efficiently filter and cool control cabinets, automation equipment & electronics. When internal temperatures get too high it can lead to data loss, equipment damage or failure. Using filter fans to cool electronics helps keep temperatures down. The FF12AF series of fans are ideal for those who want a simplified and secure process when it comes to mounting cooling systems.
The FF series was made to streamline installation. There are no tools required to mount the filter, simply push it onto the enclosure. Sliding catches allow the cover to be attached or removed. This also allows filter media replacement from the outside, without needing tools, so the process is faster and safer. The seal between the base and cover has been replaced by ribbing that directs water runoff to the outside.
|
|
|
|
|
|
|