 |
Sealcon PG9 Black Nylon Multi-Hole Cable Gland, 2 x 1.7 mm Holes, IP65 / NEMA 4X
This black Nylon 6/6 PG9 multi-hole cable gland seals two small cables through one enclosure opening. Its two 1.7 mm insert holes are suited to paired sensor leads, fine control wiring, communications lines, and other compact cable-entry applications.
Why Choose the CD09A4-BK Cable Gland?
This black Nylon 6/6 PG9 multi-hole cable gland seals two small cables through one enclosure opening. Its two 1.7 mm insert holes are suited to paired sensor leads, fine control wiring, communications lines, and other compact cable-entry applications.
A vibration-resistant, self-locking ACME dome applies even compression to the elastomer insert. The nylon construction is lightweight, durable, halogen-free, phosphorus-free, UL 94 flame protected, and resistant to salt water and many common industrial chemicals and oils.
🔌 Two Small-Cable Openings
Two 1.7 mm holes route fine cables through one PG9 entry
🧰 Black Nylon 6/6
Lightweight, durable body suits compact electrical equipment
🔒 Vibration Resistant
Self-locking ACME dome helps maintain sealing pressure
💧 IP65 / NEMA 4X
Higher ingress protection requires an ideal cable-to-seal fit
⚠️ Confirm Cable-to-Hole Fit
For IP65 performance, each cable should be at least 80% of the 1.7 mm hole diameter, and the cable-to-hole difference must not exceed 0.04 in. (1 mm). IP68 / NEMA 6 is possible only with an ideal fit and should be verified for the application. Locking nut and O-ring are sold separately.
📋 Fine-Cable PG9 Configuration
The two 1.7 mm openings are designed for small-diameter cable pairs in sensors, compact machinery, controls, communications equipment, instrumentation, and lighting-control assemblies.
Key Features & Benefits
- Self-locking ACME dome helps resist vibration
- IP65 and NEMA 4X with correctly sized cables
- IP68 and NEMA 6 possible with an ideal cable-to-seal fit
- UL 94 flame-protected, halogen-free, and phosphorus-free materials
- Approvals and conformity: RoHS, Deca BDE, REACH, WEEE, UL Registered, EAC, CE, Germanischer Lloyd, and V-0 per UL 94
Technical Specifications
| Product Code | CD09A4-BK |
|---|
| Hummel Part Number | 1.597.0903.01 |
|---|
| Insert Part Number | 1.089.0903.19 |
|---|
| Product Type | Multi-hole cord grip / cable gland |
|---|
| Color / Material | Black Nylon 6/6 |
|---|
| Seal Material | Elastomer |
|---|
| Thread Size | PG9 |
|---|
| Number of Holes | 2 |
|---|
| Hole Diameter | 0.07 in. (1.7 mm) each |
|---|
| Through-Hole Diameter | 0.60 in. (15.2 mm) |
|---|
| Body Length | 0.87 in. (22 mm) |
|---|
| Thread Length | 0.31 in. (8 mm) |
|---|
| Wrench Flats | 0.75 in. (19 mm) |
|---|
| Ingress Protection | IP65 / NEMA 4X; IP68 / NEMA 6 possible with ideal fit |
|---|
| Quantity | Sold individually |
|---|
Installation & Selection Guidance
Measure both small-diameter cables before ordering and confirm the PG9 mounting entry. Correct sizing and even dome tightening help the insert seal around both cables.
What’s Included
Includes one black nylon PG9 multi-hole cord grip with two-hole elastomer insert. Locking nut and O-ring are not included and are sold separately.
|
|
|
