Home > Relays > Percentage Timers >

Macromatic PTA2015MB Percentage Timer, 15 Min, 120V AC, No Memory

Macromatic Percentage Timer, 15 Minutes, 120V AC, No Memory
Macromatic PTA2015MB Percentage Timer, 15 Min, 120V AC, No Memory
  
Alternative Views:
Price: $164.20
Note: Ships in 10-15 Business Days. Contact us to confirm current ship date
MFG P/N: PTA2015MB
MFG: Macromatic
Weight (lbs): 0.14



Availability: In Stock
Product Code: PTA2015MB
Qty:

Description
 

The Macromatic PTA2015MB is a percentage timer. This panel mount timer relay has an input voltage of 120V AC with an output of 10A SPNO and a timer range of 15 minutes. It is used for instances when the ON time when used a percentage of a total cycle time has to be adjustable. This timer is useful for applications such as irrigation, heating & cooling, motors, and chemical feeding. It has an integrated potentiometer for time delay adjustment. An LED indicator on top shows the relay status. Termination is possible with bare wire or crimp terminals. Mounting hardware included. Note: Image is for reference. Actual part may differ.

Specifications

  • Relay Function- Percentage Timer w/o Memory
  • Relay Timer Range- 15 Minutes
  • Input Voltage- 120V AC
  • Output- 10A SPNO
  • Voltage Tolerance- +10/-15% of nominal at 50/60 Hz
  • Load- Max of 3 VA
  • Setting Accuracy- +/- 2%
  • Setting Precision- +/- 1% of total cycle time
  • Dial Resolution- Dial settings marked in 1% increments
  • Repeat Accuracy- +/- 0.1% or +/- 0.04 seconds, whichever is greater
  • Reset Time- 300ms
  • Start Up Time- 0.05 seconds
  • Operating Temperature- -28 C to 65 C (-18 F to 149 F)
  • Storage Temperature- -40 C to 85 C (-40 F to 185 F)
  • Output Contacts- 10A @ 240VAC / 7A @ 28VDC SPNO, 1/4 HP @ 120VAC
  • Lifespan- Mechanical: 10,000,000 operations, Full Load: 100,000 operations
  • Termination- Pressure Clamp Screw Terminals, #12-22 AWG wire, solid, stranded wire; Recommended tightening torque 7 in-lbs. (12 in-lbs max)
  • Dimensions- 3.5" Height x 3.5" Width x 4.1" Length
  • Approvals- UL & CUL Listed, CE

When the input voltage is introduced, the percentage timer relay energizes and the ON time delay (t1) starts. T1 is adjustable as a percentage of the total ON/OFF cycle time (t2), which is fifteen minutes. When t1 ends, the relay de-energizes for the rest of the timing cycle. The ON/OFF sequence will then repeat. This continues until the input voltage is removed. The sequence resets itself if the input voltage is taken out. 100% will keep the output constantly energized and 0% will keep it constantly de-energized. The LED on top is steady during the OFF sequence and blinks during the ON sequence.

Macromatic Percentage Timer Installation Manual

PTA2015MB 15 Minute 120V Percentage Timer without Memory

Related Products
Macromatic 70600 Terminal Cover for Percentage Timers
Price: $0.92

Add
Macromatic Terminal Cover



Lumberg Automation ASBV-R 4/LED 5-256/5M 4 Port, 2 Channel, 5 Pin, LED, 5 M Passive M12 Distribution Block $166.40
Macromatic PTA2015SB Percentage Timer, 15 Sec, 120V AC, No Memory $164.20
Macromatic CUH20A2BE Under Current Sensing Relay, 2-20A, 0.5-50 Sec, 120V, 2 Sec Delay $87.80
Mencom RJ45-07 RJ45 Cat5e RJ45 Cable, 7 Feet $8.45
Menics MAP-DS30-BLK Plastic Wall Bracket for Tower Lights, for 70mm Base $9.71
Mencom 321G PG 21 O-Ring $0.29
Menics MSGS-110-C 140 mm 1 Stack Tower Light, Rotating, Clear, 110V, w/ Sounds $174.06
Macromatic PTA1030S Percentage Timer, 30 Sec, 240V AC $165.28