 |
Macromatic ARP120A5 Alternating Relay, DPDT Cross Wired, 120V AC/DC, 10A DPDT Cross Wired
Industrial plug-in duplexor relay for alternating two loads, with 120V AC/DC control, 10A DPDT Cross Wired output, LED load indication, and a 8-pin octal base.
Balance Operating Time Across Two Loads
The Macromatic ARP120A5 is a alternating relay that helps equalize operating time between two connected loads. Each control cycle changes which load receives lead duty, distributing usage more evenly instead of repeatedly starting the same device. Its 120V AC/DC control input and 10A DPDT Cross Wired output make it a focused choice for industrial two-load control panels.
A control switch initiates the alternating action. When that initiating switch opens, the relay contacts change state so the opposite load is selected for the next cycle. Two LEDs identify the lead load in the operating sequence. The plug-in housing is designed for the 70169-D 8-pin octal socket.
⚡ 120V AC/DC Control
Designed for control circuits operating at the specified nominal voltage.
🔌 10A DPDT Cross Wired Output
Double Pull, Double Throw
💡 Dual LED Indication
Shows the lead load for faster troubleshooting.
🔁 Automatic Alternation
Changes lead duty after each completed control cycle to distribute operating time.
Key Features & Benefits
- Alternating Relay, DPDT Cross Wired: Provides purpose-built two-load control in a compact plug-in relay
- 120V AC/DC Control: Matches industrial control circuits designed for this nominal voltage
- 10A DPDT Cross Wired Output: Supplies the specified switching arrangement for the connected control load
- LED Load Indication: Gives technicians an immediate visual reference for the lead load
- Automatic Duty Rotation: Alternates lead duty as the initiating switch completes each operating cycle
- Plug-In Installation: Fits the 70169-D 8-pin octal socket for serviceable panel mounting
- Long Mechanical Life: Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
- Industrial Approvals: UL & CUL Recognized, CE, CSA, UL & CUL Listed (with Socket)
⚠️ Verify the Control Circuit and Contact Load
Before installation, confirm 120V AC/DC control power, the 10A DPDT Cross Wired output arrangement, and the connected load's voltage, current, horsepower, and pilot-duty requirements. Do not exceed the published contact ratings shown in the technical specifications.
🔄 How the Alternating Sequence Works
This alternating relay responds to an external control switch. After a completed cycle, its output contacts transfer so the next start command operates the opposite load. The result is automatic duty rotation without requiring separate alternating logic in the control panel.
Technical Specifications
| Manufacturer | Macromatic Industrial Controls |
|---|
| Part Number | ARP120A5 |
|---|
| Series | ARP Series |
|---|
| Socket | 70169-D 8-pin octal socket |
|---|
| Relay Function |
Alternating Relay, DPDT Cross Wired |
| Control Voltage |
120V AC/DC |
| Output |
10A DPDT Cross Wired |
| Voltage Tolerance |
+10/-15% of control voltage |
| Load |
<3VA |
| Operating Temperature |
-28°C to 65°C (-18°F to 149°F) |
| Storage Temperature |
-40°C to 85°C (-40°F to 185°F) |
| Output Contacts |
10A @ 240V AC / 30V DC, 1/2 HP @ 120/240V AC (N.O.), 1/3 HP @ 120/240V AC (N.C.), B300, R300 (N.O.) Pilot Duty |
| Life |
Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations |
| Dimensions |
2.4" Height x 1.7" Width x 3.1" Depth |
| Approvals |
UL & CUL Recognized, CE, CSA, UL & CUL Listed (with Socket) |
📋 Installation Overview
1. Confirm the control voltage and output-contact requirements.
2. Mount the relay in the 70169-D 8-pin octal socket.
3. Wire the initiating control inputs and both load-control circuits according to the Macromatic installation manual.
4. Test the complete operating sequence before placing the equipment into service.
✅ Typical Application Fit
Choose the ARP120A5 when a two-load control system must rotate lead duty automatically to balance accumulated operating time. The model is best matched to panels that provide 120V AC/DC control power, require a 10A DPDT Cross Wired contact arrangement, and accept the 70169-D 8-pin socket format.
Compatibility & Selection Reference
ARP120A5 Quick Specification Check
|
|
|
