Jorc 2662 24V AC OPTIMUM Timer Drain, 3/8" NPT, 0-230 PSI

JORC 2662 24V AC 3/8" NPT OPTIMUM Timer-Controlled Condensate Drain

24V AC timer-controlled condensate drain with 3/8" NPT inlet and outlet connections, 0–230 PSI (0–16 bar) pressure rating, brass valve housing, and a serviceable direct-acting solenoid valve.

✅ Designed For: Air compressors, refrigerated air dryers, and compressed-air systems with high condensate flow

The JORC 2662 is configured for 24V AC power, 3/8" NPT connections, and operating pressures up to 0–230 PSI (0–16 bar). Confirm the control voltage, port size, and pressure range before ordering because OPTIMUM timer drains are available in multiple electrical and connection configurations.

Automatic Condensate Drain Control for Compressed-Air Equipment

The JORC 2662 24V AC 3/8" NPT OPTIMUM Timer-Controlled Condensate Drain uses an adjustable electronic timer and a serviceable 2/2-way, direct-acting solenoid valve to discharge condensate from compressed-air equipment. It operates on 24V AC, uses 3/8" NPT connections, and is rated for 0–230 PSI (0–16 bar). The brass valve housing, LED cycle indication, TEST function, and NEMA 4 / IP65 protection support dependable operation in industrial compressed-air applications.

Adjustable ON and OFF cycles let the drain be matched to condensate volume and operating conditions. The timer range is 0.5–10 seconds ON / 0.5–45 minutes OFF, and the 4.5 mm (0.177 in.) valve opening supports controlled discharge. The valve is designed for compressor systems of any size.

⚡ 24V AC Control Power

Match the drain to the available control voltage before wiring or replacement

🔩 3/8" NPT Ports

Matching NPT inlet and outlet connections simplify integration into the condensate line

📈 0–230 PSI (0–16 bar)

Pressure rating supports the specified compressed-air operating range

⏱️ Adjustable Cycle Timing

0.5–10 seconds ON / 0.5–45 minutes OFF timer range for application-specific draining

Key Features and Benefits

Adjustable Timer: ON/OFF cycle range of 0.5–10 seconds ON / 0.5–45 minutes OFF for matching the drain interval to system conditions
Direct-Acting Solenoid Valve: 2/2-way valve design controls condensate discharge without a separate pilot circuit
Serviceable Construction: Brass valve housing supports maintenance and long-term industrial use
Visual Status: LED indicators show timer operation and cycle status
Built-In TEST Function: Provides a convenient way to verify drain operation during setup or maintenance
Environmental Protection: NEMA 4 / IP65 enclosure rating for industrial environments
High-quality PCB components
Designed to resist air locking during operation
Suitable for compressed-air systems of any type and size
Easy-grip timer adjustment knobs

Specifications

Part Number	2662
Brand	JORC
Product Line	OPTIMUM
Control Voltage	24V AC
Inlet and Outlet	3/8" NPT
Pressure Range	0–230 PSI (0–16 bar)
Dimensions	4.469 in. L × 1.969 in. W × 3.518 in. D
Maximum Compressor Capacity	Any size
Ambient Temperature	34°F to 131°F (1°C to 55°C)
Timer Cycle Range (ON/OFF)	0.5–10 seconds ON / 0.5–45 minutes OFF
Timer PCB	SMD technology
Timer Cycle Indication	LEDs
Valve Type	2/2-way, direct-acting
Valve Opening	4.5 mm (0.177 in.)
Valve Seals	FPM
Inlet Connection Height	10 mm (0.4 in.)
Timer Housing Material	ABS plastic
Valve Housing Material	Brass
Power Connection	DIN 43650 Form A
Environmental Protection	NEMA 4 / IP65

📦 Product Package and Manual

• (1) JORC 2662 OPTIMUM timer-controlled condensate drain

🔧 Installation and Setup Notes

Confirm electrical compatibility: Use the specified 24V AC supply and the listed DIN 43650 Form A connection.

Check system pressure: Keep operating pressure within 0–230 PSI (0–16 bar).

Set the timer: Adjust the ON and OFF cycles for the condensate load, then use the built-in TEST function to verify operation.

Follow the installation manual for wiring, connection, and maintenance instructions.

🏭 Common Applications

Use the JORC 2662 to provide timed condensate discharge for air compressors, refrigerated air dryers, and compressed-air systems with high condensate flow. Its adjustable cycle settings help match drain operation to changing condensate volume without relying on a fixed manual draining schedule.