 |
 |
 |
|
Hirschmann GDMZRC21133210 Form A DIN 43650 PG11 Solenoid Valve Connector: 24V DC LED Indicator + Diode
Clear right-angle EN 175301-803 Form A connector with 18 mm contact spacing, 2 Poles + Ground, PG 11 (4.5 to 11 mm Cable OD) cable entry, screw with conductor protection, EPDM Flat gasket, and IP65 protection.
Visible Power Status for Solenoid Valve and Actuator Wiring
The Hirschmann GDMZRC21133210 is a hardwired Form A DIN 43650 solenoid valve connector for hydraulic, pneumatic, and electromagnetic actuators. Its clear housing makes the integrated 24V DC LED easy to see, helping technicians confirm electrical status during startup, troubleshooting, and scheduled maintenance.
The 24V DC LED provides a visible power indication, while the diode helps protect the source and load from overvoltage generated by the connected coil. The right-angle housing accepts cables through a PG 11 (4.5 to 11 mm Cable OD) entry, while the central M3 x 37 mm screw provides vibration-resistant locking. When properly assembled with the included EPDM Flat gasket, the connector supports IP65 protection against dust and water jets.
💡 24V DC LEDClear housing provides an at-a-glance indication when voltage is present. ⚡ DiodeIntegrated diode supports overvoltage protection for DC coil circuits. 🔌 Form A, 18 mmEN 175301-803 geometry with 2 poles + ground for compatible devices. 💧 IP65 ProtectionDust- and water-jet-resistant performance when correctly assembled with the gasket and center screw.
⚠️ Verify Circuit Voltage, Gasket, and Cable Diameter
Confirm that the connected load matches the 24V DC LED Indicator + Diode circuit and that the cable outside diameter fits the PG 11 (4.5 to 11 mm Cable OD) entry. This model includes a EPDM Flat gasket; gasket material and profile affect sealing and application compatibility.
⚙️ Common Applications
Solenoid valves: Provide right-angle power connection and visible voltage status
Hydraulic and pneumatic actuators: Connect field wiring in automation equipment
Pressure and flow devices: Wire compatible sensors, switches, and flow indicators with Form A interfaces
Key Features & Benefits
- Combination Screw Terminal: Accepts flexible wire with ferrules and fork- or ring-style cable terminals
- Conductor Capacity: Accommodates conductors up to 16 AWG
- Central Fixing Screw: Provides secure, vibration-resistant locking
- Right-Angle Cable Entry: Directs the cable alongside the connected device
- Included Components: Connector, EPDM Flat gasket, and center screw
Technical Specifications
| Part Number | GDMZRC21133210 |
|---|
| Brand | Hirschmann |
|---|
| Connector Standard | Form A DIN 43650 / EN 175301-803 |
|---|
| Wiring Method | Hardwired |
|---|
| Circuit Type | 24V DC LED Indicator + Diode |
|---|
| Housing Color | Clear |
|---|
| Contact Type | Screw with conductor protection |
|---|
| Contact Spacing | 18 mm |
|---|
| Number of Poles | 2 Poles + Ground |
|---|
| Cable Entry | PG 11 (4.5 to 11 mm Cable OD) |
|---|
| Maximum Conductor Size | 16 AWG |
|---|
| Housing Dimensions | 34.2 mm H x 53 mm L x 27.5 mm W |
|---|
| Fixing Screw | M3 x 37 mm |
|---|
| Gasket | EPDM Flat |
|---|
| Operating Temperature | -40 F to +257 F |
|---|
| Protection Class | IP 65 |
|---|
| Approvals | CE, RoHS |
|---|
📋 Basic Wiring Overview
1. Verify compatibility: Confirm Form A geometry, 18 mm spacing, circuit voltage, polarity requirements, and cable diameter.
2. Prepare the cable: Route the cable through the PG 11 (4.5 to 11 mm Cable OD) entry and prepare conductors up to 16 AWG.
3. Terminate conductors: Secure the wires using the protected screw terminals and required grounding connection.
4. Fit the gasket: Position the included EPDM Flat gasket evenly between the connector and mating device.
5. Secure and test: Tighten the M3 x 37 mm center screw, energize the circuit, and verify the LED and connected load.
📦 What's Included
• (1) Hirschmann GDMZRC21133210 connector
• (1) EPDM Flat gasket
• (1) M3 x 37 mm center screw
🔎 Compatibility & Cross-Reference Notes
No alternate manufacturer cross-reference is listed for this configuration. Match the circuit type, Form A geometry, 18 mm contact spacing, gasket, cable entry, and electrical requirements when selecting a replacement.
|
|
|
 |
|
 |
|
