DIN 43650 Connector Black Form A Comparison

Industrial Connector Selection Guide

Non-Circuited DIN 43650 Form A Connector Comparison

Compare Hirschmann, HTP, and OMAL DIN 43650 / EN 175301-803 Form A hardwired connectors by cable entry, pole configuration, dimensions, materials, electrical ratings, and UL status. These non-circuited black-housing connectors provide a direct field-wired connection without an integrated LED, diode, rectifier, or suppression circuit.

How to Choose a DIN Form A Connector

Start with the device contact arrangement, then match the cable outside diameter to the PG9 or PG11 entry range. Confirm size requirements, conductor size, electrical ratings, and approval status before ordering. All products in these charts use screw termination, support conductors up to 16 AWG and are rated at 250 V / 16 A.

Highest protection rating HTP models are listed at IP67, while the Hirschmann and OMAL models shown are IP65.
UL-listed option The Hirschmann models are UL listed. HTP has a separate UL version available.
Broad cable range HTP covers a 5 to 10 mm cable outside diameter with unified PG9 and PG11 cable entries.

PG9 · 2 + Ground DIN 43650 Form A Connectors

EN 175301-803 Form A · non-circuited hardwired black housing

2-pole + ground

Swipe left or right to compare all manufacturers.

Characteristic Hirschmann Hirschmann DIN 43650 Form A PG9 2 + ground non-circuited connector View Products HTP HTP DIN 43650 Form A PG9 2 + ground non-circuited connector View Products OMAL OMAL DIN 43650 Form A PG9 2 + ground non-circuited connector View Products
Origin Germany China Italy
Housing Height 34.2 mm 30 mm 27 mm
Connector Length 41 mm 41 mm 41 mm
Base Dimensions 27.5 × 27.5 mm 28.8 × 28.8 mm 27.5 × 27.5 mm
Housing Material PA PA PA + 30% GF
Contact Surface Material Sn Sn Sn
Contact Bearer Material PA PA PA + 30% GF
Contact Spacing 18 mm 18 mm 18 mm
Contact Resistance ≤ 4 mΩ ≤ 4 mΩ ≤ 4 mΩ
Maximum Conductor Size 16 AWG 16 AWG 16 AWG
Cable OD 4.5 to 7 mm 5 to 10 mm 6 to 8 mm
Termination Type Screw Screw Screw
Nominal Current 250 V / 16 A 250 V / 16 A 250 V / 16 A
Center Screw M3 × 35 M3 × 32.5 M3 × 28.5
Operating Temperature −40°F to 257°F −40°F to 257°F −40°F to 257°F
Protection Class IP65 IP67 IP65
UL Listed Yes No; UL version available No

PG9 · 3 + Ground DIN 43650 Form A Connectors

EN 175301-803 Form A · non-circuited hardwired black housing

3-pole + ground

Swipe left or right to compare all manufacturers.

Characteristic Hirschmann Hirschmann DIN 43650 Form A PG9 3 + ground non-circuited connector View Products HTP HTP DIN 43650 Form A PG9 3 + ground non-circuited connector View Products OMAL OMAL DIN 43650 Form A PG9 3 + ground non-circuited connector View Products
Origin Germany China Italy
Housing Height 34.2 mm 30 mm 27 mm
Connector Length 41 mm 41 mm 41 mm
Base Dimensions 27.5 × 27.5 mm 28.8 × 28.8 mm 27.5 × 27.5 mm
Housing Material PA PA PA + 30% GF
Contact Surface Material Sn Sn Sn
Contact Bearer Material PA PA PA + 30% GF
Contact Spacing 18 mm 18 mm 18 mm
Contact Resistance ≤ 4 mΩ ≤ 4 mΩ ≤ 4 mΩ
Maximum Conductor Size 16 AWG 16 AWG 16 AWG
Cable OD 4.5 to 7 mm 5 to 10 mm 6 to 8 mm
Termination Type Screw Screw Screw
Nominal Current 250 V / 16 A 250 V / 16 A 250 V / 16 A
Center Screw M3 × 35 M3 × 32.5 M3 × 28.5
Operating Temperature −40°F to 257°F −40°F to 257°F −40°F to 257°F
Protection Class IP65 IP67 IP65
UL Listed Yes No; UL version available No

PG11 · 2 + Ground DIN 43650 Form A Connectors

EN 175301-803 Form A · non-circuited hardwired black housing

2-pole + ground

Swipe left or right to compare all manufacturers.

Characteristic Hirschmann Hirschmann DIN 43650 Form A PG11 2 + ground non-circuited connector View Products HTP HTP DIN 43650 Form A PG11 2 + ground non-circuited connector View Products OMAL OMAL DIN 43650 Form A PG11 2 + ground non-circuited connector View Products
Origin Germany China Italy
Housing Height 34.2 mm 30 mm 27 mm
Connector Length 43 mm 41 mm 42 mm
Base Dimensions 27.5 × 27.5 mm 28.8 × 28.8 mm 27.5 × 27.5 mm
Housing Material PA PA PA + 30% GF
Contact Surface Material Sn Sn Sn
Contact Bearer Material PA PA PA + 30% GF
Contact Spacing 18 mm 18 mm 18 mm
Contact Resistance ≤ 4 mΩ ≤ 4 mΩ ≤ 4 mΩ
Maximum Conductor Size 16 AWG 16 AWG 16 AWG
Cable OD 6 to 9 mm 5 to 10 mm 8 to 10 mm
Termination Type Screw Screw Screw
Nominal Current 250 V / 16 A 250 V / 16 A 250 V / 16 A
Center Screw M3 × 35 M3 × 32.5 M3 × 28.5
Operating Temperature −40°F to 257°F −40°F to 257°F −40°F to 257°F
Protection Class IP65 IP67 IP65
UL Listed Yes No; UL version available No

PG11 · 3 + Ground DIN 43650 Form A Connectors

EN 175301-803 Form A · non-circuited hardwired black housing

3-pole + ground

Swipe left or right to compare all manufacturers.

Characteristic Hirschmann Hirschmann DIN 43650 Form A PG11 3 + ground non-circuited connector View Products HTP HTP DIN 43650 Form A PG11 3 + ground non-circuited connector View Products OMAL OMAL DIN 43650 Form A PG11 3 + ground non-circuited connector View Products
Origin Germany China Italy
Housing Height 34.2 mm 30 mm 27 mm
Connector Length 43 mm 41 mm 42 mm
Base Dimensions 27.5 × 27.5 mm 28.8 × 28.8 mm 27.5 × 27.5 mm
Housing Material PA PA PA + 30% GF
Contact Surface Material Sn Sn Sn
Contact Bearer Material PA PA PA + 30% GF
Contact Spacing 18 mm 18 mm 18 mm
Contact Resistance ≤ 4 mΩ ≤ 4 mΩ ≤ 4 mΩ
Maximum Conductor Size 16 AWG 16 AWG 16 AWG
Cable OD 6 to 9 mm 5 to 10 mm 8 to 10 mm
Termination Type Screw Screw Screw
Nominal Current 250 V / 16 A 250 V / 16 A 250 V / 16 A
Center Screw M3 × 35 M3 × 32.5 M3 × 28.5
Operating Temperature −40°F to 257°F −40°F to 257°F −40°F to 257°F
Protection Class IP65 IP67 IP65
UL Listed Yes No; UL version available No

PG9 vs. PG11 Cable Entry

Choose the entry size by the actual cable outside diameter, not only by thread size. In this comparison, PG9 models cover cable ranges from 4.5 to 10 mm depending on manufacturer, while PG11 models cover ranges from 5 to 10 mm.

2 + Ground vs. 3 + Ground

Match the connector pole count to the mating device. A 2 + ground connector provides two current-carrying contacts plus protective ground; a 3 + ground connector adds a third current-carrying contact while retaining the ground connection.

DIN 43650 Form A Connector FAQ

What does non-circuited mean?

A non-circuited DIN connector does not contain an integrated LED indicator, diode, bridge rectifier, or suppression component. It provides a direct electrical connection between the field cable and the mating device.

Where are DIN 43650 Form A connectors commonly used?

Form A connectors are commonly installed on industrial solenoid valves and other devices that use the larger 18 mm contact spacing. Always verify the device interface, voltage, current, cable diameter and environmental rating before installation.

Which model in this chart offers IP67 protection?

The HTP models shown are rated IP67. The Hirschmann and OMAL models shown are rated IP65.

More DIN 43650 Connector Guides

Guide to DIN 43650 connectors Guide to DIN 43650 Connectors DIN 43650 connector basic characteristics DIN 43650 Basic Characteristics Circuited DIN 43650 Form A connector comparison Form A Circuited Connector Comparison DIN 43650 Form B hardwired connector comparison Form B Hardwired Comparison DIN 43650 Form C hardwired connector comparison Form C Hardwired Comparison

Selection note: Specifications are provided for comparison. Confirm the current product drawing and approval documentation before final design or installation.