Home > Electrical Enclosures > Push Button Boxes > 9 Position Push Button Boxes >

Saginaw SCE-9PB Push Button Enclosure, 9 Position, 30.5mm

Saginaw SCE-9PB Push Button Box, 9 Position, 30.5mm

Alternative Views:

Price: $128.29

Note: Ships in 5-7 business days, contact us to confirm current ship date
MFG P/N: SCE-9PB
MFG: Saginaw Control & Engineering
Weight (lbs): 8

Availability: In Stock
Product Code: SCE-9PB

Qty:

Description

Saginaw Control & Engineering SCE-9PB is a 9 position push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and 30.5mm pushbutton entrances in a 3x3 configuration. Used for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

9.5" H x 8.5" W x 3" D (241.3mm x 216mm x 76.2mm)
Seams are continuously welded
Cover screws thread into sealed wells
Accepts any brand of oil-tight push buttons, switches, or pilot lights
4 way standard push button entrances
Gasket is oil & water resistant
Welded mounting provision located on the back at the top and bottom
IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Industrial Enclosure & Junction Box Selector

	ILME CAP-24CS229 C-Type Surface Mount Housing, Size 104.27, 4 Pegs & Cover, 2 PG 29 Entries $55.86
	ILME MNLS-16IV25 Kit, 16 Pole Inserts, Screw Termination, Single Lever Base, Top Entry M25 Hood $96.68
	HTP Din 43650 Form C, 8 mm Male, 2 Poles + Ground $1.55
	Macromatic PTA2001HB Percentage Timer, 1 Hr, 120V AC, No Memory $164.20
	Macromatic LCP2B100F4 120V Single Probe Liquid Level Relay, Pump Down, 4.7K to 100K, 4 Sec Delay $90.38
	Deca DIN Rail Terminal Block End Plate, For 40 x 74 mm Blocks $0.65
	Mencom LP1-4RJ45 Low Profile Panel Interface Connector, 4 RJ45, Single Size Housing $93.55
	Z+F V70FS007001 Red PVC Insulated Quick Disconnect Terminal, 20-16 AWG, 2.8 x 0.5 mm, Male $0.11
	Jorc 2801 230V AC OPTIMUM Timer Controlled Drain, 1/4" NPT, 0-1200 PSI, Brass Valve $260.16