Rotatable Connection for Conduit Positioning
Use this fitting where DN 17 conduit needs a rotatable connection with a M20 x 1.5 mounting thread. The push-in connection and rotatable body provide a practical way to connect and position the conduit. Match both the nominal conduit size and the thread specification when selecting a fitting; conduit DN size identifies conduit compatibility, while the metric thread identifies the mounting connection.
Rotatable Body
Allows the conduit connection to be positioned for the intended routing.
Push-In Connection
Connects compatible nominal DN 17 conduit using a push-in fitting.
Nylon Polyamide
Black nylon polyamide construction for this conduit connection.
IP55 Protection
Protection against harmful dust deposits and low-pressure water jets from any direction.
Construction and Materials
The black nylon polyamide body combines a push-in conduit connection with a rotatable fitting design. The 1.06" (27 mm) wrench flat provides the gripping dimension for the fitting, while the 1.26" (32 mm) outer diameter defines the overall fitting width. Check these dimensions when planning access around adjacent conduit entries.
Features and Benefits
- Rotatable construction supports conduit positioning at the connection.
- Push-in design accepts the specified nominal conduit size.
- IP55 protection suits applications requiring protection against harmful dust deposits and low-pressure water jets.
- RoHS compliance
Installation Notes
- Select compatible DN 17 conduit and confirm that the mounting connection accepts M20 x 1.5 threads.
- For a clearance-hole installation, use the listed .79" (20 mm) dimension when checking the mounting opening.
- Allow for the .51" (13 mm) thread length and 1.3" (33 mm) body length in the mounting layout.
- Order the locking nut separately when it is needed for the installation.
- Position the rotatable conduit connection to suit the intended conduit route.
Conduit and Thread Selection
Nominal conduit size DN 17 and the M20 x 1.5 mounting thread describe different interfaces. Confirm both before ordering. The clearance-hole dimension is .79" (20 mm).
Application Notes
Select the PFM2017-BK for a conduit connection requiring DN 17 compatibility, a M20 x 1.5 thread, and a rotatable body. Use the dimensional information to compare available mounting space and conduit passage requirements. Keep the application within the stated IP55 protection level and operating temperature range.
Protection and Operating Temperature
This fitting has an IP55 rating for protection against harmful dust deposits and low-pressure water jets from any direction. Its operating temperature range is -30°C to 80°C (-22°F to 176°F). Match these limits to the environment where the conduit connection will be used.
Ordering Information
Sold individually. The locking nut is sold separately. Confirm the conduit size, mounting thread, and required nut before placing the order.
