 |
 |
 |
|
Seifert 43101001 KG 4310 ComPact electrical enclosure air conditioner
This model provides 3,680 BTU at 95°F / 95°F and operates from 120 V AC, 60 Hz. It supports external mounting with a powder-coated mild-steel housing and IP54 protection.
120 V Enclosure Cooling with Simple Touchpad Control
The Seifert 43101001 KG 4310 ComPact is an electrical enclosure air conditioner designed to remove heat from industrial electrical equipment. The listed rating is 3,680 BTU at 95°F / 95°F. The unit operates from 120 V AC, 60 Hz, and its RAL 7035 gray, powder-coated mild-steel housing is designed for external mounting.
The front display keeps the cabinet temperature and operating status visible, and the touchpad allows the preset temperature controller to be adjusted for the application. Its surface-treated condenser and wide fin spacing eliminate the need for filters, helping the unit maintain dependable indoor operation with limited routine service.
❄️ Rated Cooling
3,680 BTU at 95°F / 95°F
⚡ Electrical Supply
120 V AC, 60 Hz
🖥️ Display & Touchpad
Shows cabinet temperature and status while providing direct access to adjustable settings
🧰 Filter-Free Condenser
No disposable filters are required, helping reduce routine maintenance
⚠️ Verify Cooling Conditions, Voltage, and Cabinet Cutout
Cooling capacity is rated at specific internal and ambient temperatures. There is a second rating of 2,540 BTU at 95°F / 122°F, demonstrating how available output changes with operating conditions. Before ordering, calculate the enclosure heat load and confirm the available voltage, phase, frequency, fuse protection, mounting method, cutout dimensions, and condensate route.
This model is designed for indoor enclosure cooling within a listed operating range of 50°F - 131°F. Do not select the unit from the maximum BTU rating alone.
📋 Enclosure Cooling and Maintenance
The surface-treated condenser and high fin separation allow the unit to operate without disposable filters. The result is a simpler maintenance routine, although the condenser, fans, drains, and airflow paths should still be inspected at intervals appropriate for the facility. The display shows cabinet temperature and operating status, while the touchpad provides access to the adjustable temperature controller.
Key Features & Benefits
- Compressor: Reciprocating compressor
- Mounting: External mounting
- Enclosure Construction: RAL 7035 gray, powder-coated mild steel
- Filter-Free Operation: Condenser design eliminates disposable filters and reduces routine maintenance
- Accessible Controls: Display communicates temperature and status; touchpad supports setting adjustments
- High-Temperature Alarm: Alerts the operator if the internal cabinet temperature rises above 131°F (55°C)
- Protection Category: IP54
- Warranty: 2 year manufacturer's warranty
Technical Specifications
|
Product Code
|
43101001
|
|
Model
|
KG 4310 ComPact
|
|
Series
|
ComPact
|
|
Product Type
|
Electrical enclosure air conditioner
|
|
Color
|
RAL 7035 Gray
|
|
Housing Material
|
Powder-coated Mild Steel
|
|
Cooling Capacity 95°F / 95°F
|
3,680 BTU
|
|
Cooling Capacity 95°F / 122°F
|
2,540 BTU
|
|
Compressor
|
Reciprocating Compressor
|
|
Refrigerant / GWP
|
R134a / 1430
|
|
Temperature Range
|
50°F - 131°F
|
|
Air Volume Flow
|
Ambient air circuit: 240 cfm, Cabinet air circuit: 175 cfm
|
|
Mounting
|
External
|
|
Dimensions
|
25.6" H × 12.4" W × 10.2" D
|
|
Cutout Dimensions
|
25" x 10.83"
|
|
Rated Voltage
|
120 V ~ 60 Hz
|
|
Current L35L35
|
6.7 Amps
|
|
Starting Current
|
30.2 Amps
|
|
Max Current
|
8.6 Amps
|
|
Nominal Power 95°F / 95°F
|
700 Watts
|
|
Max Power
|
900 Watts
|
|
Fuse
|
16 A (T)
|
|
Connection
|
Connection Terminal Block
|
|
Protection Category
|
IP54
|
|
Approvals
|
CE, C UR US, C UL US
|
📋 Basic Installation Overview
1. Size the Cooling Unit: Calculate the enclosure's internal heat load and account for the highest expected ambient temperature before confirming capacity.
2. Verify Electrical Service: Match the available voltage, phase, frequency, branch protection, starting current, and connection method to the specifications.
3. Prepare the Enclosure: Confirm the 25.6" H × 12.4" W × 10.2" D unit dimensions and Not specified cutout dimensions, then follow the product document when laying out the opening.
4. Mount and Manage Condensate: Install the unit using the specified external mounting method and provide the required condensate route without obstructing either air circuit.
5. Commission the System: Energize the unit, confirm fan and compressor operation, check the temperature setting, and verify that the enclosure maintains the required internal temperature.
Installation and electrical work should be completed by qualified personnel using the linked Seifert documentation and applicable codes.
📦 Included & Installation Verification
• Seifert KG 4310 ComPact air conditioner (43101001)
Package Contents:
The source description does not itemize the supplied mounting hardware or condensate accessories. Review the linked product document and the shipment packing list before scheduling installation.
📄 Seifert KG 4310 Air Conditioner Downloads
Selection Note: Confirm product code 43101001, cooling conditions, voltage, phase, mounting layout, and protection category before ordering or replacing an installed unit.
|
|
|
 |
|
 |
|
