Sealcon CD25MR-MX high quality nickel plated brass cord grip for hazardous locations is designed for extreme applications. Also known as Hummel 1.610.2500.51. Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: M25 x 1.5
- Cable O.D. Range: .39" - .63" (10 - 16 mm)
- Through Hole Diameter: .98" (25 mm)
- Body Length: 1.02" (26 mm)
- Thread Length: .28" (7 mm)
- Wrench Flat Dome: 1.18" (30 mm)
- Wrench Flat Body: 1.18" (30 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal, Polyamide Clamping Insert & Buna-N O-Ring
- Operating temperature- -20 C to 95 C (-4 F to 203 F)
- International Approvals - ATEX, CE, CSA, and German Lloyd
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
Sealcon M25 x 1.5 nickel plated brass hazardous location (Hazloc) cable glands are used in applications that require greater performance and fire resistance, which is accomplished without twisting the cable. This strain relief fitting provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. Increase flexibility by switching out the standard or reduced inserts. The self locking ACME thread on the dome top makes sure the overlapping splines create an even seal. This prevents the form seal from being pulled out of the cord grip & provides your cable with pull-out protection so no damage is caused. Note: Contact us about purchasing individual standard or reduced inserts
Hazardous location cable glands are ATEX approved, indicating they are made for potentially explosive environments. The CD25MR-MX is labeled Ex-e, for greater safety.
Sealcon CD25MR-MX M25 Hazardous Location Strain Relief Cable Gland