Saginaw Control and Engineering Enclosures

Saginaw Enclosures for industrial control panels and electrical components

Saginaw Enclosures for Safer, Cleaner Control Panel Builds

Protect wiring, terminal blocks, and electrical components from dirt, water, impact, and everyday plant-floor wear. Choose from wall-mounted push button boxes, trough enclosures, continuous hinge enclosures, and Enviroline series cabinets built for industrial automation environments.

Shop Saginaw Enclosures

🛡️

Protect Components

Use Saginaw electrical enclosures to shield controls and wiring from dust, dirt, dripping water, washdown spray, and accidental contact.

🔘

Mount Operators

Push button boxes are available for 22.5mm or 30.5mm devices, with layouts for 1 to 16 operators depending on box style.

⚙️

Build Faster

Use separate sub-panels to mount contactors, controls, terminal blocks, and I/O before installing the enclosure.

🏭

Fit the Environment

Select carbon steel, stainless steel, or fiberglass designs based on location, cleaning process, corrosion exposure, and enclosure depth needs.

What Are Saginaw Enclosures Used For?

Saginaw enclosures are used to house and protect industrial electrical equipment in control panels, pump systems, packaging lines, or processing areas. A compact push button box works well near a machine operator station, while a larger Enviroline or continuous hinge enclosure gives technicians room to mount controls, wiring, and sub-panels inside one protected cabinet.

Choose the Right Saginaw Enclosure by Job

🔘 Standard Push Button Boxes

Use these for start, stop, reset, selector switch, and pilot light stations where a compact operator box is enough. They support 22.5mm or 30.5mm entries and can handle 1 to 12 push buttons.

Shop Standard Boxes

📦 Extra Deep Push Button Boxes

Choose extra deep boxes when wiring space matters. These provide about 1.75" to 2" more depth than standard styles, making them useful for deeper switches, contact blocks, and added internal wiring.

Shop Extra Deep Boxes

🧰 Extra Large Push Button Boxes

Use extra large push button boxes when one station needs multiple operators grouped together. They fit 4 to 16 push buttons and provide more face space than standard boxes.

Shop Extra Large Boxes

📐 Sloped Front Push Button Boxes

Choose a sloped front box when operators need a better viewing and pressing angle. These are practical for machine-mounted control stations, bench controls, and local operator panels.

Shop Sloped Front Boxes

💧 Enviroline Junction Enclosures

Use Enviroline junction enclosures in hose-down or wet industrial areas where controls and connections need a sealed, serviceable housing. The 180° door opening improves access during wiring and maintenance.

Shop Enviroline Junction Boxes

Saginaw Enviroline trough junction enclosure

🔌 Enviroline Trough Junction Enclosures

Choose trough junction enclosures for longer wiring runs, terminal blocks, and distributed connections. Widths are available up to 36", giving installers more room to route conductors cleanly.

Shop Trough Enclosures

🚪 Continuous Hinge Enclosures

Use continuous hinge enclosures when a full-length hinge is preferred for repeated access. They protect electrical components from dirt and water while keeping the door aligned during service.

Shop Continuous Hinge

Saginaw Enviroline enclosure with 3 point hardware

🔒 Enviroline Enclosures with 3 Point Hardware

Choose 3 point hardware for larger indoor or outdoor control cabinets that need stronger door engagement. These enclosures use concealed hinges and are available up to 48" high.

Shop 3 Point Hardware Enclosures

Fast Selection Guide

Need operator controls?

Use push button boxes for machine start/stop stations, selector switches, and pilot lights.

Need more wiring depth?

Use extra deep push button boxes when contact blocks or wiring stacks need more clearance.

Need component mounting space?

Use junction or continuous hinge enclosures with a sub-panel for relays, terminals, and controls.

Need wet-area protection?

Use Enviroline enclosures for hose-down, washdown, and outdoor industrial applications.

Simple Selection Flow

1️⃣ Pick the job

2️⃣ Match the environment

3️⃣ Check device count

4️⃣ Add sub-panel if needed

Common Industrial Applications

🏭 Machine Control Stations

Mount start, stop, emergency stop, reset, and selector controls near conveyors, presses, mixers, and packaging equipment.

💧 Washdown Areas

Protect components in food processing, bottling, chemical handling, wastewater, and other areas exposed to water or cleaning spray.

🔌 Junction & Wiring Points

Use junction and trough enclosures to organize terminal blocks, field wiring, sensor connections, and distributed I/O wiring.

⚙️ Control Panel Builds

Install sub-panels inside larger enclosures to mount drives, relays, breakers, power supplies, and automation hardware.

Quick Reference Checklist

✅ Count push buttons first (For Push Button Boxes)

Standard boxes support 1 to 12 buttons; extra large styles can support up to 16.

✅ Match the hole size (For Push Button Boxes)

Choose 22.5mm or 30.5mm entries based on the operator devices being installed.

✅ Check internal depth

Use extra deep boxes when contact blocks, wiring, or accessories need additional clearance.

✅ Choose the right material

Carbon steel fits many indoor jobs; stainless steel or fiberglass may be better for corrosion-prone areas.

✅ Plan for service access

180° door openings and continuous hinges make wiring, troubleshooting, and replacement work easier.

✅ Add a sub-panel when needed

Sub-panels help keep components secure, organized, and easier to wire before final installation.

Ready to Build a Cleaner, Safer Control Panel?

Shop Saginaw push button boxes, junction enclosures, trough enclosures, continuous hinge enclosures, and compatible sub-panels for industrial automation builds.

Shop All Saginaw Enclosures