Mencom MIN Molded Cordset Part Number Guide

Interactive selector

Mencom MIN Cordset Part Number Guide

Build a Mencom MIN molded cable part number by choosing the cable, connector, length, material, and protection options required for your application.

Compatibility note: Not all options are available for every type of MIN cable. The completed code should be verified against the product search results before ordering.
Generated part number
No part number generated yet
Choose one option in each field to create a part number.
Search This Part Number

If the part number search returns no results, email [email protected] for availability and selection assistance.

Choose Your MIN Cable Options

Fields marked “blank code” are valid choices. They do not add characters to the finished part number.

The cable code follows “MIN.”
Select a pole count to see the MIN size.
The pole count and configuration form one code block.
Standard lengths: 3, 6, 12, 20, 30, and 50.
R applies to configurations other than MFRP, MRFP, MFRPX, and MRFPX.
Yellow is the standard blank-code color.
Confirm the standard metal for the selected connector.
A50 silicone is available only for 2-, 3-, or 4-pole MIN cables.

MIN Connector Size Quick Reference

MIN Size I2–6 poles
7/8" mating thread
MIN Size II6–8 poles
1" mating thread
MIN Size III9, 10, 12, or 19 poles
1-1/8" mating thread

Six-pole products may use Size I or Size II construction. Confirm the mating thread.

Cable Materials

PVC — Polyvinyl Chloride
Industry-standard cable rated from -40°C to 105°C.
PUR — Polyurethane
Resists oil and abrasion; rated from -40°C to 80°C.
TPE — Thermoplastic Elastomer
Resists weld slag; rated from -40°C to 90°C.

Armor Options

Stainless steel
Crush, corrosion, and abrasion resistance.
Stainless steel with discrete Teflon wire
Same as above but adds high-temperature capability.
PVC-covered stainless steel
Crush and abrasion resistance with a liquid-tight covering.
Silicone
Resists chemicals and weld slag and supports high-temperature use. Available only for 2-, 3-, or 4-pole cables.

Before You Order

  • Euro color-code cables and 19-pole versions use lengths measured in meters; other standard MIN cable lengths are shown in feet.
  • Use the R code only when the selected connector configuration does not already define the right-angle end.
  • Check pole count, mating thread, cable rating, connector gender, and armor compatibility on the product listing.