Light Efficient Design LBI Linear Transformer LED Lights



The LBI series of linear transformer LED lights from Light Efficient Design provide numerous options for a wide variety of installations. They feature an internal driver and are listed as both a retrofit kit and a fixture. Various accessories allow for installation in high bay / low bay fixtures, troffers, vapor tight fixtures, cove lighting, and linear continuous runs. They are available for 2 foot, 3 foot, or 4 foot fixtures and offer Light Efficient Design's FlexWatt and FlexColor technology. Each one has 3 possible wattage settings and 3 possible color temperatures, allowing for 9 different variations in a single light.

LED LBI Series LightsAll LBI linear transformer lights include:

  • Power & control cables (one for the bar input side, one for the pigtail side)
  • (2) surface mount magnetic clips
  • (4) 1/4" hex screws
  • Service disconnect
  • Flex setting cover
  • Connection wires (between service disconnect & latch connector)
  • (3) wire nuts for low voltage connections
  • (2) latch connectors for parallel wiring

WIRING METHODS


LBI Series Wiring Methods
LBI Series Accessories
Accessory Uses

45 Degree Mounting Bracket 		Cove or Display Lighting

Blade Clip 		High Bay Fixtures with metal or plastic reflectors

Emergency Battery Backup 		Used if AC power goes down

Linking Cable 		High Bays, Troffers, Linear Fixtures

Motion Sensor 		Used for high/low motion & daylight

Suspended Inline Bracket 		Suspended Pendant Installations

Magnetic Clip 		Holds bar in position in metal fixture

Spacer Connector 		Creates standard length continuous runs

Seamless Connector 		Linear Continuous Runs

T-Bar Clip 		T-Bar Grid Ceiling Continuous Runs

Remote 		Programs Motion Sensor

Mounting Options
Installation Accessories

Troffers 		Linking Cables (for wiring in series)

Linear Fixtures 		Linking Cables (for wiring in series)

Linear Continuous Runs 		Seamless Connector
Magnetic Clip
Suspended Inline Bracket (for pendant installations)
T-Bar clip (for T-Bar Grid ceilings)
Spacer Connector (for making a standard length)

High Bay Fixtures 		Blade Clip (for fixtures with metal or plastic reflectors, parallel wiring)
Linking Cables (for wiring in series)