 |
The Jorc 3964-TEST MAG-11 level sensing drain is magnetically operated. It has no air loss, and does not need a power source to operate. The magnetic actuator opens and closes a cylinder valve to remove condensate from the system. Ideal for refrigerated dryers, liquid separators, coolers, and piston compressors. Works with any size compressed air filter. The test button can depressurize the drain for maintenance procedures and also make sure the orifice isn't being blocked.
- Dual 1/2" NPT inlet (top & side)
- 1/8" outlet with hose pipe connector
- Rated for 0-230 PSI (0-16 bar)
- Space saving design to install in compact spaces
- Serviceable valve
- 2/2 way stainless steel direct acting valve
- Aluminum housing resists corrosion
- Integrated air lock prevention
- Lower half of the housing can rotate 360 degrees for easier installation
- Test button
Specifications
- Dimensions- 4.055" Height x 5.75" Width x 4.72" Depth
- Max Filter Capacity- Unlimited
- Max Drainage Capacity- 37.8 gallons per hour at 230 PSI
- Valve Seals- FPM
- Valve Opening- 2 mm (0.08")
- Inlet Height- 4.1" (top), 3.5" (side)
- Ambient Temperature- 34 F to 122 F (1 C to 50 C)
- Environmental Protection- NEMA 6 (IP 68)
- Housing Material- Aluminum with ElectroPhoretic (EP) coating
Jorc MAG-11 Level Sensing Condensate Drain with Test Button
|
|
|