Information on Jorc condensate drain valves

Jorc Condensate Drain Valves

Jorc Condensate Drain Valves

Remove Condensate Before It Damages Your Compressed Air System

Choose Jorc timer controlled and level sensing condensate drain valves for air compressors, dryers, filters, receivers, separators, and high-pressure compressed air applications.

0-230 PSI
Standard drain ranges
Up to 6000 PSI
High-pressure options
12V-230V
Multiple voltage choices
Inlet Sizes
1/8" through 1" NPT

⏱️ Timer Controlled Drains

Use a timed open/close cycle to discharge condensate at set intervals. Best when condensate load is predictable.

  • Simple setup for compressors, filters, dryers, and receivers
  • Good choice for scheduled condensate removal
  • Replacement timers available on most series

💧 Level Sensing Drains

Discharge only when condensate reaches a set level. Best when you want demand-based draining and reduced air loss.

  • Ideal for variable condensate loads
  • Available with electric, pneumatic, or magnetic operation
  • Pneumatic or magnetic can operate without electricity

⚙️ How to Choose the Right Jorc Condensate Drain

1. Pick the drain type

Use timer drains for routine discharge. Use level sensing drains when condensate volume changes throughout the day.

2. Match pressure rating

Most Jorc drains handle 0-230 PSI. Choose TEC-44 for up to 600 PSI or OPTIMUM for up to 6000 PSI.

3. Match voltage

Common options include 12V, 24V, 115V, or 230V depending on the series.

4. Confirm port size

Jorc drain valve inlet and outlet options range from 1/8" to 1".

Shop Jorc Condensate Drain Valves by Series

⏱️ Timer Controlled
TEC-11 Series Jorc Condensate Drain Valve

TEC-11

Low-profile timer controlled drain for compact compressed air installations.

  • DIN 43650 Form B power connector
  • 1/8" or 1/4" NPT inlet
  • 24V, 115V, or 230V
  • 0-230 PSI
  • 1/8" or 1/4" outlet
  • Replacement timers available
⏱️ Timer Controlled
EAD Series Jorc Condensate Drain Valve

EAD

Economy timer controlled drain for standard compressed air condensate removal.

  • DIN 43650 Form A power connector
  • 1/4", 3/8", or 1/2" NPT inlet
  • 115V or 230V
  • 0-230 PSI
  • 1/4", 3/8", or 1/2" outlet
  • Replacement timers available
⏱️ Timer Controlled
COMBO Series Jorc Condensate Drain Valve

COMBO

Timer drain with integrated strainer and ball valve to simplify installation and service.

  • DIN 43650 Form A power connector
  • 1/4" NPT female and 1/2" NPT male inlet
  • 12V, 24V, 115V, or 230V
  • 0-230 PSI
  • 1/2" outlet
  • Replacement timers available
🔥 High Pressure Timer Drain
OPTIMUM Series Jorc Condensate Drain Valve

OPTIMUM

Heavy-duty timer drain for high-pressure compressed air applications.

  • DIN 43650 Form A power connector
  • Brass or stainless steel valve
  • 1/4", 3/8", or 1/2" NPT inlet
  • 24V, 115V, or 230V
  • Up to 6000 PSI
  • 1/4", 3/8", or 1/2" outlet
  • Replacement timers available
⚙️ Motorized Ball Valve
TEC-44 Series Jorc Condensate Drain Valve

TEC-44

Digital timer controlled motorized ball valve for larger ports and higher flow drainage.

  • Cable and plug power connection
  • Digital display indicates time setting
  • 1/4", 1/2", 3/4", or 1" NPT inlet
  • 24V, 115V, or 230V
  • 0-600 PSI
  • 1/4", 1/2", 3/4", or 1" outlet
⏱️ Digital Timer Drain
COMBO-D-LUX Jorc Condensate Drain Valve

COMBO-D-LUX

Digital version of the COMBO drain with illuminated display for easier setup checks.

  • DIN 43650 Form A power connector
  • Illuminated digital display
  • 1/4" NPT female and 1/2" NPT male inlet
  • 12V, 24V, 115V, or 230V
  • 0-230 PSI
  • 1/2" outlet
  • Replacement timer available
💧 Level Sensing
SMART GUARD-MINI Jorc Level Sensing Drain Valve

SMART GUARD-MINI

Compact level sensing drain for tight installations where demand-based draining is needed.

  • DIN 43650 Form B power connector
  • AL version includes second DIN connector for alarm
  • 1/2" NPT inlet
  • 24V, 115V, or 230V
  • 0-230 PSI
  • 1/4" outlet
  • 2/2 way direct acting valve
💧 Level Sensing with Alarm Options
SMART GUARD Jorc Level Sensing Drain Valve

SMART GUARD

Level sensing condensate drain with alarm modes and multiple inlets.

  • DIN 43650 Form B power connector
  • Normally open or normally closed alarm modes
  • Three 1/2" NPT inlets
  • 24V, 115V, or 230V
  • 0-230 PSI; high-pressure version 0-725 PSI
  • 1/4" outlet
  • Optional digital level indicator
💨 Pneumatically Operated
POD-TD Jorc Level Sensing Drain Valve

POD-TD

Pneumatically operated level sensing drain for compressed air systems.

  • 6mm valve opening
  • Dual 1/2" NPT inlet
  • 44-230 PSI
  • 1/4" outlet
  • 3/2 way direct acting valve
  • Does not need electricity
🧲 Magnetic Level Sensing
MINI-MAG Jorc Magnetic Level Sensing Drain Valve

MINI-MAG

Compact magnetically operated level sensing drain for tight spaces and non-electric setups.

  • 1/2" NPT inlet
  • 0-230 PSI
  • 1/8" outlet
  • Does not need electricity
🧲 Magnetic Level Sensing
MAG-11 Jorc Magnetic Level Sensing Drain Valve

MAG-11

Magnetically operated level sensing drain with dual inlets and direct acting valve design.

  • 2/2 way direct acting valve
  • Dual 1/2" NPT inlet
  • 0-230 PSI
  • 1/8" outlet
  • Does not need electricity

📊 Jorc Drain Valve Quick Comparison

Series Drain Type Pressure Power Best Use
TEC-11 Timer 0-230 PSI 24V, 115V, 230V Low-profile installations
EAD Timer 0-230 PSI 115V, 230V Economy drain applications
COMBO Timer 0-230 PSI 12V, 24V, 115V, 230V Strainer and ball valve included for easier installation
OPTIMUM Timer Up to 6000 PSI 24V, 115V, 230V High-pressure systems
TEC-44 Timer 0-600 PSI 24V, 115V, 230V Motorized ball valve drainage
COMBO-D-LUX Timer 0-230 PSI 12V, 24V, 115V, 230V Digital display setup
SMART GUARD-MINI Level sensing 0-230 PSI 24V, 115V, 230V Compact demand-based draining
SMART GUARD Level sensing 0-230 PSI / 0-725 PSI HP 24V, 115V, 230V Alarm and level indicator options
POD-TD Level sensing 44-230 PSI Pneumatic Pneumatically operated draining without electricity
MINI-MAG Level sensing 0-230 PSI Magnetic Small spaces and non-electric setups
MAG-11 Level sensing 0-230 PSI Magnetic Dual inlets with no power source needed

✅ Use Timer Drains When

  • You want a simple drain cycle
  • Condensate load is predictable
  • You need a cost-effective drain
  • You need replacement timer availability

✅ Use Level Sensing Drains When

  • Condensate volume changes during operation
  • You want demand-based discharge
  • You want to reduce wasted compressed air
  • You need alarms, pneumatic, or magnetic options

🧰 Quick Reference Checklist

✔ Confirm timer or level sensing operation
✔ Match voltage: 12V, 24V, 115V, or 230V
✔ Check PSI rating before ordering
✔ Match NPT inlet and outlet size
✔ Choose alarm output if monitoring is required
✔ Use non-electric condensate drains where wiring is limited

❓ Jorc Condensate Drain Valve FAQ

What is a condensate drain valve?

A condensate drain valve removes water, oil, and condensate from equipment such as air compressors, receivers, filters, separators, and dryers.

What is the difference between timer controlled and level sensing drains?

Timer controlled drains open at preset intervals. Level sensing drains discharge only when condensate reaches a set height, making them useful for variable condensate loads.

Which Jorc drain should I use for high pressure?

Choose OPTIMUM for applications up to 6000 PSI, TEC-44 for applications up to 600 PSI, or the SMART GUARD high-pressure version for level sensing applications up to 725 PSI.

Which Jorc drains do not need electricity?

POD-TD is pneumatically operated, MINI-MAG and MAG-11 are magnetically operated level sensing drains that do not need electricity.

Ready to Select a Jorc Drain Valve?

Shop Jorc timer drains, level sensing drains, magnetic drains, pneumatic drains, and high-pressure condensate drain valves.

Shop Jorc Condensate Drains