 |
 |
 |
|
Cable Tie Express 11M-50-UV-100 Black Nylon Cable Tie with Mounting Hole, 11.6" x 0.18", 50 lb Tensile Strength
Black Nylon Cable Tie with Mounting Hole for cable bundling and wire management, with 11.6" long, 0.18" wide, 50 Pounds tensile strength, up to 3" bundle diameter, Black Nylon 66, outdoor / uv exposure applications.
Why Choose the Cable Tie Express 11M-50-UV-100?
The Cable Tie Express 11M-50-UV-100 is a black nylon cable tie with mounting hole built for cable bundling, wire management, and harness organization. Manufactured from nylon 6/6. UV resistant for outdoor use. This product is suitable for organizing cable runs, harnesses, and general utility applications in commercial or OEM environments.
Use it when the job requires 50 pounds holding strength, up to 3" bundle, and a cable tie style matched to the environment. The black color helps match the tie to the intended application and identification needs.
📏 11.6" long, 0.18" wide
Cable tie size
💪 50 Pounds
Holding strength for organized cable runs, harnesses, and wire bundles
🧰 Black Nylon 66
Material and color
🔧 3"
Maximum bundle diameter helps prevent overloading the tie
⚠️ Confirm Bundle Size and Environment
Confirm bundle diameter, tensile rating, material, installation environment, and package quantity before ordering. This black UV-resistant version is intended for outdoor exposure, but application temperature and bundle load should still be verified.
This model is rated for 50 Pounds tensile strength and 3" maximum bundle diameter.
📋 Application Fit
Organizing cable runs, harnesses, and general utility applications in commercial or OEM environments.
Outdoor Exposure: Black UV-resistant nylon helps support outdoor cable management applications.
Panel Mounting: Mounting hole lets the bundle be secured to a control panel, wall, or mounting surface with a screw or rivet.
Key Features & Benefits
- Useful when a cable or wire bundle needs to be attached to a control panel or wall
- Mounting hole at the head of the cable tie
- Can be attached with a screw or rivet before or after wire is bundled
- Length: 11.6"
- Width: 0.18"
- Thickness: 0.06"
- Tensile Strength: 50 Pounds
- Packaging: Bags of 100 pieces with a minimum order of 50 bags (5,000 total)
Technical Specifications
|
Product Code
|
11M-50-UV-100
|
|
Vendor Part Number
|
11M-50-UV-100
|
|
Brand
|
Cable Tie Express
|
|
Product Type
|
Black Nylon Cable Tie with Mounting Hole
|
|
Length
|
11.6"
|
|
Width
|
0.18"
|
|
Thickness
|
0.06"
|
|
Tensile Strength
|
50 Pounds
|
|
Color
|
Black
|
|
Max. Bundle Diameter
|
3"
|
|
Material
|
Nylon 66
|
|
Environment
|
Outdoor / UV Exposure
|
|
Mounting Screw Size
|
#10
|
|
Temperature Rating
|
-40 F to 185 F (-40 C to 85 C)
|
|
Flammability Rating
|
UL 94-V2
|
|
Packaging
|
Bags of 100 pieces with a minimum order of 50 bags (5,000 total)
|
📋 Cable Tie Use Guidelines
1. Check Bundle Diameter: Confirm the cable bundle is within the listed maximum bundle diameter before tightening the tie.
2. Match the Environment: Use specialty cable tie styles only where they fit the application requirements.
3. Avoid Over-Tightening: Tighten enough to secure the bundle without crushing cable insulation or restricting movement where service access is needed.
Always follow local electrical practices and application requirements when securing wire, cable, conduit, or harness assemblies.
📦 Packaging / Ordering
Bags of 100 pieces with a minimum order of 50 bags (5,000 total)
These zip ties are supplied in bulk for high-volume use, packaged in bags of 100 pieces with a minimum order of 50 bags (5,000 total). Image is for reference only; actual part may vary.
📞 Product Selection Help
Use the listed length, width, tensile strength, material, bundle diameter, and environment rating to compare this cable tie with your application before ordering.
For substitutions, match the cable tie style, color, tensile rating, material, and application environment first.
|
|
|
 |
|
 |
|
