Construction and Wiring Access
The enclosure has an ABS plastic base and a clear polycarbonate cover. The integrated terminal block provides 6 circuits and 12 terminations within the housing. A removable cover provides access to the screw connections for installation and subsequent wiring work.
Cable Entry and Terminal Capacity
Molded knockouts on each end accommodate entry fittings up to 1/4-inch NPT. The entry opening is 5/8 in (15.6mm). The screw terminals accept 14–20 AWG conductors. Check the entry size separately from the conductor size when selecting the cable-entry arrangement.
Each terminal has two screws so that each side can be wired independently. This arrangement supports connection work on either side of the terminal without sharing a single terminal screw.
Key Features and Benefits
- The integrated terminal block keeps the wiring junctions within one enclosure.
- The compact housing accommodates installations with limited available space.
- Molded knockouts on each end provide cable-entry locations.
- The removable cover gives access for installation and later wiring work.
- The clear polycarbonate cover supports routine visual inspection of the terminal area.
- Two screws on each terminal allow the two sides to be wired independently.
Applications
Use this terminal block enclosure for wiring junctions in larger industrial equipment and other assemblies that require routine inspections. The clear cover supports a visual check of the terminal area, while the removable cover provides access when connection work is required.
Installation Notes
- Check the enclosure dimensions and allow access to the removable cover and cable-entry points.
- Match the connection layout to 6 circuits and 12 terminations.
- Prepare the required molded knockout entries for fittings up to 1/4-inch NPT.
- Use 14–20 AWG conductors with the screw terminals.
- Match the electrical application to the 120V AC, 60 Hz, 15A rating.
- Use an IP65 cable gland to meet the IP65 enclosure rating.
Ingress Protection
This enclosure is rated IP65 when used with an IP65 cable gland. The cable-entry arrangement is part of that requirement, so select the gland accordingly when preparing the enclosure.
Datasheets and Enclosure Guides
LiteCycle SG-TB-6P15-GC Enclosure Datasheet (PDF)
Info on LiteCycle Electrical Enclosures
Industrial Enclosure & Junction Box Selector
