LED Voltage Indication for AC Valve Connections
The 110–120V AC LED provides a visible indication that supply voltage is present at the connector. This version provides LED indication for the specified AC supply. Match the circuit configuration to the application when selecting among Hirschmann Form A connectors.
Visible Voltage Indication
The 110–120V AC LED lets you check whether supply voltage is present.
Right-Angle Connection
The right-angle housing provides the specified Form A connection geometry.
Protected Screw Terminals
Screw contacts include conductor protection for hardwired connections.
Center-Screw Locking
The central fixing screw provides vibration-proof locking at the mating connection.
Housing and Terminal Construction
The clear housing measures 34.2 mm high by 45 mm long by 27.5 mm wide. Screw terminals with conductor protection accommodate a maximum conductor size of 16 AWG. The patent-protected combination terminal supports flexible wire with wire-end ferrules, or fork-type cable shoes and eye terminals secured directly beneath the screw head.
Features and Benefits
- The combination terminal accommodates flexible wire with ferrules as well as fork-type cable shoes or eye terminals.
- The 4–11 mm cable diameter range provides the specified cable-entry fit for hardwired installation.
- The included NBR flat gasket and center screw form part of the connector assembly.
- CE and RoHS
Application Notes
Use this connector with compatible hydraulic, pneumatic, or electromagnetic actuators that have the specified Form A interface. Solenoid valves are a typical application, and the same connector format is also used with compatible pressure sensors and flow indicators. Confirm the mating contact layout and the 110–120V AC circuit requirement before selecting the connector.
Replacement and Fitment
Form A contact spacing, cable-entry dimensions, circuit voltage, and gasket configuration all matter when selecting a replacement. This GDMZRC2124370 configuration uses an NBR flat gasket and includes the 110–120V AC LED indicator.
Installation Notes
- Confirm a DIN 43650 Form A mating interface with 18 mm contact spacing and two poles plus ground.
- Match the supply to the 110–120V AC LED circuit.
- Select cable with an outside diameter of 4–11 mm for the 1/2" NPT cable entry.
- Use conductors within the maximum size of 16 AWG and the appropriate terminal arrangement.
- Fit the included NBR flat gasket and secure the mating connection with the M3 × 37 mm fixing screw.
- Refer to the product images for drawings when checking the connection and mounting dimensions.
Protection and Operating Range
The connector has an IP65 protection rating under IEC 60529 and is protected against dust and splashes. The operating temperature range is -40°F to +257°F. Use these limits when assessing the installation environment.
Included Components
Includes the connector, an NBR flat gasket, and the center screw. This is a hardwired connector with screw terminals for connecting the installation conductors.
Connector Guide and Resources
