Home > DIN Rail Terminal Blocks > End Plates & Brackets >

Deca DIN Rail Terminal Block End Plate, For 35 x 75 mm Blocks

Deca SEP3 DIN Rail Terminal Block End Plate
Deca SEP3 DIN Rail Terminal Block End Plate, For 35 x 75 mm Blocks
  
Price: $0.61
MFG P/N: SEP 3
MFG: Deca
Weight (lbs): 0.03

Quantity in Stock :500


Availability: In Stock
Product Code: SEP3
Qty:

Description
 

The Deca SEP3 DIN rail terminal block end plate is made to be used with the Deca SDU2.5/4 or SPE2.5/4 spring clamp 35.5 x 75mm DIN rail terminal blocks. End plates are mounted at the end of a row of terminal blocks to separate them, either from a different size terminal block or from the end bracket. Note: Image is for reference, actual part may differ

Deca SEP3 DIN Rail Terminal Block End Plate, For SDU2.5/4 & SPE2.5/4



ILME CDM-40 CD Series Insert, Male, Size 77.27, 40 Pin, 10A $16.55
Mencom DDB15-06LS Panel Interface Connector, DDB15, 6LS housing $98.40
Macromatic LCP2A250F2 120V Single Probe Liquid Level Relay, Pump Up, 1K to 250K, 2 Sec Delay $90.38
Mencom MINC-4MP-FW MIN Size I Plug, 4 Pole, Male Straight, 5-13 mm, European $23.66
GardTec SC92-W2 92mm Wire Form Fan Guard $0.60
Macromatic PAP400 400V Plug-in Phase Monitor Relay $55.17
Kacon KLLAL1 Medium Duty Limit Switch, Snap Action Roller Lever Plunger, 1NO 1NC Contacts $31.98
Menics ATEP-RYG 56 mm 3 Stack Andon Tower Light w/ Push Button Control Box, Red Yellow Green, 110V $212.96
Hoffman BFVL13R2 Vinyl Insulated Ring Terminal 1/2" Stud 16-14 AWG $0.16