Meltric DS & DSN Decontactor Series Power Connectors
Meltric Power Connectors Make Power Connections Safer, Faster, and Easier to ServiceMeltric DSN and DS Series Decontactor plugs and receptacles combine a power connector and disconnect switch in one assembly, helping maintenance teams reduce downtime, improve lockout/tagout safety, and simplify equipment changeouts in industrial environments. ✅ What are Meltric power connectors used for?Meltric power connectors are used to safely connect and disconnect motors, pumps, welders, conveyors, portable equipment, cord drops, and washdown machinery. DSN Series connectors cover compact 20A to 150A applications, while DS Series connectors cover 20A to 200A applications where higher current capacity, rugged housings, or heavy-duty industrial disconnects are needed. Choose the Right Meltric Connector SeriesUse DSN Series for compact, watertight switch-rated connections. Use DS Series when the job needs higher amperage options, rugged housings, or heavy-duty industrial disconnect assemblies. 🔌 DSN Series Decontactor Connectors
DSN2020A switch-rated connector for compact equipment, small motors, and tight panel layouts. Shop DSN20 →⚡ DS Series Decontactor Connectors
DS100100A DS connector for larger industrial loads and line-of-sight disconnect needs. Shop DS100 →
DS200200A DS connector for high-current equipment where safe, repeatable disconnects are required. Shop DS200 →DSN vs DS Series: Fast Selection GuideDSN SeriesBest fit when space is limited and the connection needs watertight performance for washdown or wet industrial areas.
DS SeriesBest fit for heavier-duty power connections, higher amperage options, and installations that need rugged casing choices.
Why Maintenance Teams Use Meltric DecontactorsMeltric switch-rated connectors are built for equipment that gets disconnected often. Instead of hardwiring every motor or relying on a basic pin-and-sleeve plug, a Meltric assembly gives technicians a safer way to disconnect power at the equipment. 🛡️ Safer DisconnectsPush-button disconnection opens the circuit before the plug is removed, helping protect workers from live parts and exposed arcing. ⚙️ Faster ChangeoutsPlug-and-play equipment connections can reduce motor and machine changeout time by up to 50% compared with hardwired setups. 🔥 Enclosed Arc ChamberThe quick-break mechanism opens contacts in 15 ms or less and contains arcing inside the device. 🔩 Reliable ContactsSpring-loaded 85% silver / 15% nickel contacts maintain pressure and conductivity through repeated operation. Complete Meltric AssemblyA typical Meltric power connector assembly is built from matched components. Select the receptacle and inlet first, then choose the handle or adapter that fits the mounting angle, cable entry, and washdown requirement.
1️⃣
Female Receptacle
Includes safety shutter, spring-loaded contacts, and push-button disconnection.
2️⃣
Male Inlet
Connects to the receptacle and provides a secure power connection.
3️⃣
Adapter
Straight, angled, metal, or nylon styles position the assembly correctly.
4️⃣
Handle
Supports cable entry and can be selected for straight or angled routing. Choose by JobMatch the connector to how the equipment is used, not just the amperage. Wet areas, frequent maintenance, heavy cable drops, and lockout requirements all affect the best assembly. 💧 Washdown EquipmentUse DSN connectors with watertight ratings where plugs are exposed to water, cleaning cycles, or food and beverage processing areas. ⚙️ Motors & PumpsUse switch-rated DSN or DS connectors when motors need safe local disconnection for maintenance or replacement. 🏭 Conveyors & Production LinesUse Meltric assemblies to simplify equipment swaps and keep disconnect points close to the machine. 🔒 Lockout/TagoutUse models with lockout provisions when unauthorized reconnection or accidental startup must be prevented. 🔧 Cord DropsUse handles, adapters, and cord-mounted connectors to bring power safely to portable or movable equipment. ⚡ Welders & High-Load EquipmentUse DS Series options when the application needs higher current capacity or a heavier-duty connector body. Quick Reference Checklist
1. Confirm amperage
Pick DSN20, DSN30, DSN60, DSN150, or DS20, DS30, DS60, DS100, or DS200 based on full-load current.
2. Match voltage and phase
Verify the connector configuration matches the equipment voltage, phase, and wiring layout.
3. Check the environment
Use watertight options for washdown, wet locations, outdoor exposure, or dusty plant areas.
4. Select accessories
Choose the correct handle, adapter, wall box, angle, cable entry, and lockout option. Find the Right Meltric Power ConnectorShop Meltric DSN and DS Series Decontactor plugs, receptacles, inlets, handles, and adapters for safe industrial power connections. Shop Meltric Connectors |
