HTP Connectors

HTP connectors including DIN 43650 valve connectors, M12 connectors, M8 cables, and industrial LED lighting

HTP Connectors for Sensors, Solenoid Valves & Control Cabinets

Find HTP DIN 43650 valve connectors, M12 connectors, M8 cables, and 6000K LED cabinet lights built for industrial automation wiring, machine control, and panel visibility.

🔌 Sensor Wiring

Use M12 and M8 connectors for sensors, actuators, I/O blocks, and compact machine wiring.

✅ Valve Control

Choose DIN 43650 Form A, B, or C connectors for solenoid valves, hydraulic valves, and pneumatic equipment.

💡 Cabinet Lighting

Add 6000K LED tube lights or work lights to improve visibility inside control panels and machinery.

⚠️ Harsh Areas

Look for UV-resistant and ATEX-approved DIN 43650 options when the environment requires it.

HTP Connector Product Types

🔵 HTP M12 Connectors

Use HTP M12 connectors for sensor cables, actuator wiring, I/O modules, and machine automation connections.

  • Molded cables, receptacles, and hardwired connectors
  • Available in 4 to 12 pin configurations
  • Common choice for compact industrial sensor wiring

🔵 HTP M8 Connectors

HTP M8 connectors are built for smaller sensors and tight-space equipment wiring.

  • 3 pin or 4 pin hardwired connectors
  • 3 pin or 4 pin receptacles
  • Female molded cordsets with 5 meter cable lengths

🟢 Hardwired DIN 43650 Valve Connectors

HTP hardwired DIN 43650 solenoid valve connectors help wire valve coils directly in pneumatic and hydraulic systems.

  • Form A, Form B, and Form C styles
  • Available with or without circuitry
  • Includes UV-resistant and ATEX-approved specialty versions

🟢 Molded DIN 43650 Valve Connectors

Molded HTP DIN 43650 valve connectors reduce wiring time by combining the valve connector and cable into one ready-to-install assembly.

  • Form A, Form B, and Form C options
  • Typical cable lengths from 1 to 10 meters
  • Available with or without circuit protection
  • Top-entry versions available for space-limited panels

HTP Industrial LED Lighting

💡 Control Cabinet Lighting

HTP 6000K LED tube lights make it easier to inspect terminals, relays, PLCs, and wiring inside control cabinets.

  • 11W to 52W power range
  • 250mm to 1270mm lengths
  • Male M12 connector on one end and female M12 connector on the other

💡 LED Work Lights

HTP LED work lights provide focused 6000K illumination for machines, work cells, and inspection areas.

  • 50mm or 64mm diameter housings
  • 2.5W or 4.2W options
  • Male 4 pin M12 connector attached

⚙️ Quick Selection Guide

Choose M12 when:

You need sensor, actuator, or I/O wiring with 4 to 12 pins.

Choose M8 when:

Space is tight and the device uses 3 or 4 pin compact sensor wiring.

Choose DIN 43650 when:

You are wiring solenoid valves, pneumatic valves, or hydraulic valve coils.

Choose HTP lighting when:

You need 6000K cabinet or machine lighting with M12 connectivity.

📌 HTP Connector Comparison

Product Type Best Use Key Specs Shop
M12 Connectors Sensors, actuators, I/O wiring 4 to 12 pins View M12
M8 Connectors Compact sensor wiring 3 or 4 pins, 5m cordsets View M8
Hardwired DIN 43650 Field-wired solenoid valves Form A, B, C; circuit and no-circuit options View Hardwired
Molded DIN 43650 Fast valve connector replacement Form A, B, C; 1m to 10m cables View Molded
HTP LED Lighting Cabinet and work lighting 6000K, 2.5W to 52W options View Lighting

🔍 Common HTP Connector Applications

✅ Solenoid valve wiring
✅ Hydraulic and pneumatic valve control
✅ Industrial sensor connections
✅ Machine-mounted actuator wiring
✅ Control cabinet illumination
✅ Work cell and inspection lighting

Shop HTP Connectors by Application

Select the connector style that matches your device, pin count, cable length, and installation environment.