Choose the Right Menics Signal Light for Faster Machine Status Visibility

1-5 Stack light tiers available

25-140 mm Compact to large-area visibility

LED / Incandescent Options for steady, flashing, and multi-color signaling

Wall / Pole / Direct Mounting choices for machines, panels, and work cells

🔎 Long-Distance Visibility

Use larger 56 mm, 85 mm, or 140 mm lights when operators need to see status across a production floor.

Typical fit: MSGS, MT, PRE, PTE

🧩 Compact Equipment

Use smaller stack lights when space is limited on a machine frame, test fixture, or small device enclosure.

Typical fit: PLD, PME

🧱 Wall-Mount Signaling

Use wall-mounted models when a pole light would block access, create snag points, or sit too far from the operator station.

Typical fit: MWE, PWE

🔊 Visual + Audible Alerts

Use sound-equipped signal lights when alarms must cut through plant noise or when visual status alone is not enough.

Typical fit: MSGS, select MWE, PME models,

MSGS Series

Choose MSGS for large 140 mm square rotating signal towers where visibility and sound matter.

• 140 mm square tower lights
• Stud or wall mount
• Up to 5 colored tiers
• Rotating light operation
• Models with up to 5 signal sounds

Shop MSGS Series

MWE Series

Choose MWE for low-profile wall mount signaling where multiple LED colors need to sit behind one lens.

• Wall mount design
• Up to 4 LED colors
• Single clear or white lens options
• Steady and flashing operation
• Pre-wired 800 mm lead

Shop MWE Series

PLD Series

Choose PLD for compact 25 mm LED tower lights on small equipment, fixtures, and local status points.

• 25 mm diameter
• Aluminum body
• Up to 5 tiers
• Short pole and long pole options
• Steady, flashing, and steady/flashing models

Shop PLD Series

PRE Series

Choose PRE for 56 mm LED tower lights with clear tier separation and preassembled construction.

• 56 mm diameter
• Up to 5 LED tiers
• Steady and flashing models
• 12V, 24V, 110V, and 220V options
• Prewired lead connection on many models

Shop PRE Series

Pick Visibility 25 mm for compact machines, up to 56 mm for standard equipment, up to 140 mm for long-distance alerts.

Pick Mounting Use pole, direct, surface, or wall mount based on access and line-of-sight.

Pick Signal Type Use steady for status, flashing for action needed, and sound for urgent alarms.

Match Voltage Confirm 12V, 24V, 110V, 220V, or wide-range input before ordering.

Red Fault, stop, emergency, or machine down

Yellow Warning, attention needed, changeover, or delay

Green Running, ready, normal operation, or cycle complete

Blue Operator call, maintenance request, or custom plant signal

Clear Custom indication, auxiliary status, or process-specific signal

✅ Confirm tower diameter: 25 mm, 45 mm, 56 mm, 85 mm, or 140 mm.

✅ Match the voltage to the machine control circuit.

✅ Choose steady, flashing, rotating, or sound-equipped signaling.

✅ Count how many colors or tiers the process needs.

✅ Check whether pole, wall, direct, or surface mounting is required.

✅ Verify whether poles, bases, brackets, or accessories are sold separately.

✅ Use wall mount models when space above the machine is limited.

✅ Use audible models when the operator may not see the light immediately.