Light Efficient Design & Remphos LED Lighting Options

Light Efficient Design / Remphos LED Lighting

Upgrade Industrial, Commercial & Outdoor Lighting Without Replacing Every Fixture

Shop LED retrofit lamps and Remphos light fixtures for outdoor locations, machine areas, job sites, offices, and even hazardous locations. Reduce maintenance with LED life ratings commonly up to 50,000 hours.

⚡ Fast Selection Steps

  1. Identify the existing lamp type: fluorescent, HID, SOX, screw-in, recessed, or full fixture.
  2. Match the base, mounting style, voltage, and installation location.
  3. Verify the desired light output: 360°, directional, high bay, wall pack, or downlight.
  4. Confirm environment ratings for wet areas, outdoor use, temporary work, or hazardous locations.

💡 LED Retrofit Lamps by Application

Use LED retrofit lamps when the existing housing is still usable and the goal is to improve brightness, reduce heat, and cut replacement labor without installing a completely new fixture.

🔵 Fluorescent Retrofit LED Lights

Replace fluorescent lamps in shop lights, strip fixtures, troffers, and utility fixtures. These retrofits are useful in maintenance rooms, production areas, offices, storage aisles, and service spaces where fixture replacement would slow down work.

  • Designed for existing fluorescent-style housings
  • Good for wide, even indoor light distribution
  • Reduces lamp changeouts compared with fluorescent tubes
Shop Fluorescent Retrofit

🟢 High Bay / Low Bay Retrofit Lights

Use high bay and low bay LED retrofits for warehouses, fabrication areas, gyms, loading docks, and manufacturing floors. They help replace older HID or metal halide lighting in spaces where ceiling height and lumen output matter.

  • Made for open industrial and commercial spaces
  • Helps improve visibility over work zones and aisles
  • Reduces downtime from hard-to-reach lamp maintenance
Shop High Bay / Low Bay

🟠 Corn Cob LED Lights

Corn cob LED lamps are a practical choice for post tops, wall packs, shoebox fixtures, and other HID-style housings that need broad light output. Their multi-sided LED layout helps spread light in more than one direction.

  • Common replacement style for metal halide and HID lamps
  • Useful where 360° or wide-area light output is needed
  • Check lamp length, base type, and fixture clearance before ordering
Shop Corn Cob LEDs

🔴 Hazardous Location LED Lights

Hazardous location LED lights are used in demanding areas where standard commercial lighting is not appropriate. They are commonly selected for industrial plants, utility spaces, processing areas, and facilities with strict environmental requirements.

  • Built for harsher environments than standard lamps
  • Useful for maintenance teams replacing legacy industrial lighting
  • Verify location classification, voltage, and mounting before installation
Shop Hazardous Location

🔵 A19 / A21 LED Lights

A19 and A21 LED lamps fit everyday general-service lighting needs in offices, workrooms, utility areas, breakrooms, and fixture housings that use standard bulb shapes. They are a simple upgrade where a compact lamp is required.

  • Standard bulb shape for common commercial fixtures
  • Useful for general area and task lighting
  • Confirm base type, wattage replacement, and color temperature
Shop A19 / A21 LEDs

🟢 Temporary Work Lights

Temporary LED work lights provide portable illumination for maintenance shutdowns, job sites, construction areas, machine repair, and temporary production setups. They are useful when fixed lighting is unavailable or not positioned where work is happening.

  • Made for portable jobsite and maintenance lighting
  • Useful during equipment service, outages, and installations
  • Check cord length, daisy chaining, and voltage requirements
Shop Temporary Work Lights

🟠 Filament Style LED Lights

Filament style LED lights are used where the lamp is visible and appearance matters. They work well in decorative fixtures, hospitality spaces, retail areas, offices, and vintage-style lighting designs.

  • Classic exposed-filament appearance with LED efficiency
  • Useful for visible lamps and decorative fixtures
  • Available for spaces that need warmer, less industrial-looking light
Shop Filament Style LEDs

🔴 SOX Retrofit LED Lights

SOX LED retrofits help replace low-pressure sodium lamps used in roadway, parking, security, and municipal-style lighting. They are a focused option when the existing fixture type is still in place but the old lamp technology is difficult to maintain.

  • Designed for low-pressure sodium replacement applications
  • Useful for outdoor visibility and security lighting upgrades
  • Confirm lamp size and fixture compatibility before ordering
Shop SOX Retrofit

🔵 Recessed Can LED Retrofits

Recessed LED retrofits upgrade can lights in places such as offices, retail areas, and lobbies. They work best when the fixture housing is still functional but the existing lamp needs better efficiency and longer service life.

  • Fits recessed lighting applications
  • Good for clean ceiling lines and directional downlighting
  • Confirm can size, trim style, and color temperature
Shop Recessed LEDs

🏢 Remphos & LED Light Fixtures

Choose a complete LED light fixture when the existing housing is damaged, outdated, poorly sealed, or not designed for the coverage pattern you need. Fixtures are often the better choice for new installations, outdoor upgrades, and spaces where appearance or mounting style matters.

🔵 Ceiling & Wall Lights

Ceiling and wall LED fixtures are used in stairwells, corridors, offices, and commercial interiors. They provide a finished installation when a simple lamp retrofit is not enough.

  • Surface-mount and wall-mount lighting options
  • Useful for indoor commercial spaces and utility areas
  • Good choice when fixture appearance matters
Shop Ceiling & Wall Fixtures

🟢 Outdoor Lighting

Outdoor LED fixtures support building perimeters, parking areas, walkways, and security lighting. They are selected when the fixture must handle weather exposure while delivering dependable light coverage.

  • Designed for exterior commercial and industrial lighting
  • Useful for safety, visibility, and security applications
  • All fixtures are solar powered - check effectiveness of solar lighting in your area
Shop Outdoor Lighting

🟠 LED Retrofit Kits

LED retrofit kits convert existing fixture bodies to LED while keeping much of the installed housing in place. They are useful for facilities that want a cleaner upgrade than a lamp swap without the labor of a full fixture replacement.

  • Helps modernize existing fixtures
  • Useful for staged lighting upgrades across a facility
  • Confirm fixture dimensions, wiring method, and mounting hardware
Shop LED Retrofit Kits

📉 Why Switch to LED?

LED lighting helps reduce maintenance work, fixture heat, and lamp disposal issues compared with older fluorescent, HID, metal halide, and sodium technologies.

  • Many LED options are rated up to 50,000 hours
  • LEDs gradually dim over time instead of failing suddenly
  • Lower heat output can help reduce stress inside enclosed fixtures and makes them safer to the touch
  • No mercury makes disposal easier than fluorescent lamps

✅ Best Use Cases

Light Efficient Design and Remphos products work well for facility teams upgrading lighting in phases instead of replacing every fixture at once.

  • Warehouse aisle and bay lighting
  • Parking lot and wall pack upgrades
  • Commercial ceiling and wall fixtures
  • Maintenance, temporary work, and retrofit projects

⚠️ Before You Order

The fastest way to avoid returns is to verify the electrical and physical fit before selecting a lamp or fixture.

  • Confirm voltage and wiring requirements
  • Match base type, lamp length, and fixture clearance
  • Check indoor, outdoor, wet, or hazardous location needs
  • Compare color temperature and beam direction

🔎 Quick Reference: Which LED Lighting Category Should You Choose?

Replacing fluorescent tubes?

Use fluorescent retrofit LED lights for troffers, strips, and shop-light style fixtures.

Lighting a warehouse or plant floor?

Use high bay or low bay LED retrofits for open spaces with higher mounting heights.

Upgrading HID-style outdoor fixtures?

Use corn cob LEDs, wall pack retrofits, post top lights, or solar outdoor LED fixtures.

Working in a harsh area with potentially dangerous conditions?

Use hazardous location LED lights and verify the required location rating before installation.

Need a finished new installation?

Use Remphos ceiling, wall, or outdoor LED light fixtures instead of a lamp-only retrofit.

Need portable job lighting?

Use temporary LED work lights for maintenance, construction, shutdowns, and equipment repair.

Keeping the existing fixture body?

Use LED retrofit kits when a full fixture replacement is unnecessary but a lamp swap is not enough.

Need a visible decorative lamp?

Use filament style LEDs where appearance matters in exposed-bulb fixtures.

✅ LED Lighting Upgrade Checklist

☑ Confirm existing lamp or fixture type
☑ Match base, voltage, and mounting style
☑ Check fixture clearance and lamp orientation
☑ Choose color temperature for the workspace
☑ Verify outdoor, wet, or hazardous location needs
☑ Decide between retrofit lamp, retrofit kit, or new fixture