GardTec Fan Filter Assembly Cross Reference Chart

Compare GardTec plastic fan filter assembly part numbers with Comair Rotron, EBM, ETRI, Qualtek, GLOBE, NIDEC, and NIDEC / Power General references. Use the chart to identify a potential GardTec replacement for enclosure cooling fans, control cabinets, computers, and other filtered-airflow applications.

1. Find the current brand

Choose the column for the fan filter manufacturer already installed in the equipment.

2. Match the part number

Locate the existing manufacturer number and read across the same row to the GardTec reference.

3. Confirm fit and airflow

Verify fan size, mounting dimensions, filter density, and airflow requirements on the product page before ordering a replacement.

Understanding PPI Filter Density

PPI means pores per inch. Lower-PPI media generally supports greater airflow, while higher-PPI media generally provides finer particle filtration and may increase airflow resistance. Dustier environments may require fan filters with a higher density. Select the density that matches the cooling demand and contamination level of the enclosure.

30 PPI · Higher airflow 45 PPI · Balanced filtration 60 PPI · Finer filtration 100 PPI · Highest density available

Plastic Fan Filter Assembly Cross References

GardTec	Comair Rotron	EBM	ETRI	Qualtek	GLOBE	NIDEC	NIDEC / Power General
SC40-P15/30 40 mm · 30 PPI	—	—	PFA-40-30	09150-F/30	—	—	—
SC40-P15/45 40 mm · 45 PPI	—	—	PFA-40-45	09150-F/45	—	—	—
SC60-P15/30 60 mm · 30 PPI	557239	—	PFA-60-30	09250-F/30	PFA2430	—	—
SC60-P15/45 60 mm · 45 PPI	557240	—	PFA-60-45	09250-F/45	PFA2445	—	—
SC80-P15/30 80 mm · 30 PPI	552621	—	PFA-80-30	09325-F/30	PFA3130	32135-1	339543
SC80-P15/45 80 mm · 45 PPI	552622	10020-1-5170	PFA-80-45	09325-F/45	PFA3145	32135-2	339544
SC80-P15/60 80 mm · 60 PPI	—	—	PFA-80-60	09325-F/60	—	—	—
SC80-P15/100 80 mm · 100 PPI	—	—	PFA-80-100	09325-F/100	—	—	—
SC92-P15/30 92 mm · 30 PPI	557218	—	PFA-92-30	09362-F/30	PFA3630	32136-1	339545
SC92-P15/45 92 mm · 45 PPI	557219	10023-1-5170	PFA-92-45	09362-F/45	PFA3645	32136-2	339546
SC92-P15/60 92 mm · 60 PPI	—	—	PFA-92-60	09362-F/60	—	—	—
SC92-P15/100 92 mm · 100 PPI	—	—	PFA-92-100	09362-F/100	—	—	—
SC120-P15/30 120 mm · 30 PPI	552628	—	PFA-120-30	09450-F/30	PFA4730	32137-1	339547
SC120-P15/45 120 mm · 45 PPI	562629	10021-1-5170	PFA-120-45	09450-F/45	PFA4745	32137-2	339548
SC120-P15/60 120 mm · 60 PPI	—	—	PFA-120-60	09450-F/60	—	—	—
SC120-P15/100 120 mm · 100 PPI	—	—	PFA-120-100	0945-F/100	—	—	—
SC162-P15/45 162 mm · 45 PPI	—	—	PFA-172-45	—	—	—	—

Common Fan Filter Assembly Uses

GardTec plastic fan filter assemblies help protect fan openings on electrical enclosures, computers, telecommunications equipment, and power supplies. The filter media helps reduce airborne dust entering the enclosure while the guard supports safer, cleaner fan operation.

Cross Reference Notice

Cross references are intended as a product-selection starting point. Manufacturer designs and specifications can change, so confirm specifications before replacing an installed assembly.

Need help selecting a GardTec fan filter assembly?

Use the linked GardTec part numbers above to review available products or email us at [email protected] with your requirements. We can let you know which part would be best for your application.