You are here: Home > Liquid Tight Cable Glands > Nickel Plated Brass Dome Fittings > Metric Nickel Plated Brass Dome Fittings > Metric Standard Brass Dome Fittings
Dome Fittings
Part Numbers Cable Range Thread Range
Standard Inches (mm)
CD12MA-BR .12" - .26" (3 - 6.5 mm) M12 x 1.5
CD12MR-BR .08" - .20" (2 - 5 mm) M12 x 1.5
CD16MA-BR .16" - .31" (4 - 8 mm) M16 x 1.5
CD16MR-BR .08" - .24" (2 - 6 mm) M16 x 1.5
CD17MA-BR .20" - .39" (5 - 10 mm) M16 x 1.5
CD17MR-BR .12" - .28" (3 - 7 mm) M16 x 1.5
CD20MA-BR .24" - .47" (6 - 12 mm) M20 x 1.5
CD20MR-BR .20" - .35" (5 - 9 mm) M20 x 1.5
CD22MA-BR .39" - .55" (10 - 14 mm) M20 x 1.5
CD22MR-BR .28" - .47" (7 - 12 mm) M20 x 1.5
CD25MA-BR .51" - .71" (13 - 18 mm) M25 x 1.5
CD25MR-BR .35" - .63" (9 - 16 mm) M25 x 1.5
CD32MA-BR .71" - .98" (18 - 25 mm) M32 x 1.5
CD32MR-BR .51" - .79" (13 - 20 mm) M32 x 1.5
CD40MA-BR .87" - 1.26" (22 - 32 mm) M40 x 1.5
CD40MR-BR .79" - 1.02" (20 - 26 mm) M40 x 1.5
CD50MA-BR 1.26" - 1.50" (32 - 38 mm) M50 x 1.5
CD50MR-BR .98" - 1.22" (25 - 31 mm) M50 x 1.5
CD63MA-BR 1.46" - 1.73" (37 - 44 mm) M63 x 1.5
CD63MR-BR 1.14" - 1.38" (29 - 35 mm) M63 x 1.5
Sort By:
Page of 2
   
 

Metric Nickel Plated Brass Cable Glands

Sealcon nickel plated brass cable glands with metric thread are available in M12 to M63 sizes. They have overlapping splines that create an even seal, which keeps the form seal from being pulled out of the fitting. They have either reduced or standard inserts, which are interchangeable to accommodate a greater range of cable diameters. The material in non-corrosive, so it can withstand substances like salt water, weak acids, alcohol, and gasoline. The full measurement refers to the through hole diameter followed by the pitch (Ex- M16 x 1.5).