 |
 |
 |
|
The Suns SND4100-SP-C safety limit switch has a glass fiber reinforced plastic housing with a spring coil actuator. M20 single conduit and 1NO/1NC snap action contact block. It has galvanically separated contacts with a positive opening for the NC contact. 4 x 90 degree actuator positions. The screw terminals have self lifting clamps which make wiring simpler. Meets the standard set by EN 50047. These limit switches can be used in many different applications and industries, including industrial automation, packaging, material handling, and construction equipment.
Specifications
- Conduit- M20
- Body Style- Single Conduit
- Contact Block- 1NO/1NC Snap Action
- Operation- Spring Coil Actuator
- Overall Dimensions- 30.5mm Width x 30.5mm Depth x 172mm Height
- Operating Speed- 0.05mm-2m/sec
- Operating Frequency- Mechanical: 120 ops/min Electrical: 30 ops/min
- Insulation Resistance- > 100MOhm @ 500 VDC
- Contact Resistance- < 25mOhm
- Rated Current/Voltage- 10 A / 600 VAC
- Electrical Rating- UL/cUL Listed(E216958) for AC15 A600/ DC13 Q300
- Dielectric Strength-1000VAC for 1 min between non-continuous terminals
2500VAC for 1 min between each terminal and ground
- Lifespan- Mechanical: 10,000,000 Electrical: 500,000
- Operating Temperature- -25 - 80 C (-13 - 176 F) without formation of ice
- Humidity- < 95% RH
- Protection Class- IP 67 (Total protection from dust and temporary immersion in water - 1 meter (3.28') for up to 30 minutes)
- Approvals- UL, CUL, CSA, CE, CCC
Suns SND4100-SP-C Limit Switch with M20 Cable Entry
|
|
|
 |
|
 |
|