|
|
|
|
The Suns SND4100-SP-A safety limit switch has a glass fiber reinforced plastic housing with a 1/2" NPT single conduit and 1NO/1NC snap action contact block. Operation through a spring coil actuator. It has galvanically separated contacts with a positive opening for NC contacts. 4 x 90 degree actuator positions. The screw terminals feature self-lifting clamps to make wiring simpler. Meets the standard set by EN 50047. These limit switches are useful in a number of different applications and industries, including industrial automation, packaging, material handling, and construction equipment.
Specifications
- Conduit- 1/2" NPT
- Body Style- Single Conduit
- Contact Block- 1NO/1NC Snap Action
- Operation- Spring Coil Actuator
- Overall Dimensions- 30.5mm Width x 30.5mm Depth x 172mm Height
- Operating Speed- 0.05mm-2m/sec
- Operating Frequency- Mechanical: 120 ops/min Electrical: 30 ops/min
- Insulation Resistance- > 100MOhm @ 500 VDC
- Contact Resistance- < 25mOhm
- Rated Current/Voltage- 10 A / 600 VAC
- Electrical Rating- UL/cUL Listed(E216958) for AC15 A600/ DC13 Q300
- Dielectric Strength-1000VAC for 1 min between non-continuous terminals
2500VAC for 1 min between each terminal and ground
- Lifespan- Mechanical: 10,000,000 Electrical: 500,000
- Operating Temperature- -25 - 80 C (-13 - 176 F) without formation of ice
- Humidity- < 95% RH
- Protection Class- IP 67 (Total protection from dust and temporary immersion in water - 1 meter (3.28') for up to 30 minutes)
- Approvals- UL, CUL, CSA, CE, CCC
Suns 1/2" NPT Safety Limit Switch
|
|
|
|
|
|
|