 |
The Suns HLS-1A-11H heavy duty limit switch has a solid zinc alloy housing with a side plunger. 1/2" NPT conduit housing with a 1NO/1NC SPDT snap action contact block. This switch is recommended for applications in more demanding environments. It has a high repeat accuracy (0.03 mm for linear travel), and meets the standards set by EN60947-5-1, IEC 60947-5-1, UL508, NEMA250, and CSA22.2. These limit switches are useful in many applications, including industrial automation, packaging machinery, material handling, and construction equipment.
Specifications
- Conduit- 1/2" NPT
- Contact Block- 1NO/1NC SPDT Snap Action
- Operation- Side Plunger
- Overall Dimensions- 42mm Width x 44.6mm Depth x 102.5mm Height
- Operating Speed- 0.05mm-2m/sec
- Rated Current/Voltage- 10 A / 600 VAC
- Vibration Resistance-25gn (10-150Hz, 11ms) per IEC60068-2-6
- Shock Resistance-60gn (9ms) per IEC60068-2-27
- Dielectric Strength-2200VAC for 1 minute
- Short Circuit Protection- 10A fuse
- Terminal Wire Size-12-22AWG (2.05-0.644 square mm)
- Lifespan- Mechanical: 10,000,000 Electrical: 1,000,000
- Operating Temperature- -28.9 - 85 C (-20 - 185 F)
- Protection Class- IP 67 conforming to IEC60529. (Total protection from dust and temporary immersion in water - 1 meter (3.28') for up to 30 minutes)
NEMA Types 2,4,6,6 P, 12,13
- Approvals- UL, CUL, CSA, CE, CCC
Suns HLS-1A-11H Heavy Duty Limit Switch with Snap Action Contact Block
|
|
|