Home > Panel Meters > PAX 1/8 DIN Intelligent Panel Meters >

Red Lion PAXC0020 Panel Meter, Dual Counter, 6 Digit, Red LED, AC

Red Lion Dual Counter, 6 Digit, Red LED, AC
Red Lion PAXC0020 Panel Meter, Dual Counter, 6 Digit, Red LED, AC


 
Alternative Views:


Price: $318.00
MFG P/N: PAXC0020
MFG: Red Lion
Weight (lbs): 0.65

Quantity in Stock :1


Availability:
In Stock
Product Code: PAXC0020
Qty:

Description
 

The Red Lion PAXC0020 PAX series panel meter is a dual counter with a 6 digit, Red LED display in a 1/8 DIN housing. The display offers 0.56" numbers, while the red LED is readable even in sunlight. Compatible inputs can come from switch contacts, CMOS & TTL circuit outputs, magnetic pickups, and RLC sensors. It accommodates directional, uni-directional, & Quadrature signals. The front panel has 5 keys, with 3 of them being programmable function keys. AC powered

Features

  • 1/8 DIN Housing
  • 6 Digit, Red LED Display
  • Up to 3 Count Displays
  • Programmable Scale Factors
  • Programmable Function Keys/User Inputs
  • Four Setpoint Alarm Outputs (w/ Option card)
  • Dual Count Quad Inputs
  • NEMA 4X/IP65 - Front Panel
  • Adjustable Brightness to Fit Surrounding Environment

Red Lion PAX Series User Manual

Specifications

Display
6 digit, 0.56" (14.2 mm) red sunlight readable LED
Annunciators:
A - Counter A, B - Counter B, C - Counter C - Upper significant digit display of counter
SP1 - setpoint 1 output state, SP2 - setpoint 2 output state, SP3 - setpoint 3 output state, SP4 - setpoint 4 output state
Power Requirements
AC Power: 85 to 250 VAC, 50/60 Hz, 18 VA
Isolation: 2300 Vrms for 1 min. to all inputs and outputs. (300 V working)
Sensor Power
12 VDC, +/-10%, 100 mA max. Short circuit protected
Memory
Nonvolatile memory retains programmable parameters & display values
User Inputs
Three programmable user inputs
Max. Continuous Input: 30 VDC
Isolation To Sensor Input Commons: Not isolated
Logic State: Jumper selectable for sink/source logic
Response Time: 6 msec. typical; function dependent.
Output
Response Time: 25 microsec.; add 6 msec (typical) if a relay card is installed
Timed Output Accuracy: Counter = +/- 0.01% + 10 msec.
Standards Compliance
CE Approved
EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
EN 61010-1: General Requirements
EN 61010-2-030: Particular Requirements for Testing and Measuring Circuits
RoHS Compliant
UL Recognized Component: File #E179259
UL Listed: File #E137808
Type 4X Enclosure rating (Face only)
IP65 Enclosure rating (Face only)
IP20 Enclosure rating (Rear of unit)
Physical
Operating Temperature: 0 C to 50 C (32 F to 122 F)
Storage Temperature: -40 C to 60 C (-40 F to 140 F)
Humidity: 85% max. relative humidity (non-condensing)
Vibration to IEC 68-2-6: Operational 5 to 150 Hz, 2 g.
Shock to IEC 68-2-27: Operational 25 g (10 g relay).
Altitude: Up to 2000 meters
Construction: NEMA 4X/IP65 outdoor use, IP20 Touch Safe, Installation Category II,
Pollution Degree 2, One piece bezel/case; flame resistant; Synthetic rubber keypad; panel gasket & mounting clip
Connection: High Compression Cage-Clamp Terminal Block
Wire Strip Length: 0.3" (7.5 mm)
Wire Gage: 30-14 AWG copper wire
Torque: 4.5 inch-lbs (0.51 N-m) max.
Dimensions: 1.95" x 3.8" x 4.2"

Dual Counter Red Lion Panel Meter PAXC0020

Additional Product Information

Four setpoint outputs can be supplied for the meter through an optional digital output plug in card. After setup, the parameter list can be locked either completely, or with only the setpoints available. This panel meter proves ideal for use in industrial applications. The meter should not be used to directly command motors, valves, and actuators without safeguards.

Panel Meter Comparison Chart