|
|
|
|
The Red Lion C48TS103 C48 series panel meter is a single preset timer with an NPN OC / relay output. It features a 2 line, 6 digit, transmissive backlit LCD display with 1/16 DIN housing. The backlit display shows a red digital readout on the first line and a green readout on the second line. The resistance to noise interference makes it ideal for industrial applications. AC powered. Note: This timer is not made to directly control motors, valves, or actuators that do not have safeguards.
Features
- One Preset
- 12 Timing Range Modes
- Dual Line, 6 Digit Transmissive LCD Display w/Backlighting
- Red Top Line & Green Lower Line
- NPN OC/Relay Output
- 85 to 250 VAC Input Power
- NEMA 4X/IP65 - Front Panel
- Field Replaceable Relay Output Board
- Status Indicators for Outputs
- Programmable User Inputs
- Function Keys on Front Panel
- Black Plastic Housing is Lightweight & Withstands Impact
- Can be Stacked Together Horizontally or Vertically
Red Lion C48T Series User Manual
Specifications
Display Main Display: 0.3" digits Secondary Display: 0.2" digits Annunciators: Value- PRS, 1, & 2; Output- 01 and 02 Power Requirements AC Power: 85-250 VAC, 50/60 Hz, 9 VA max DC Power: 11-14 VDC @ 150 mA max Memory Nonvolatile E2PROM retains all programmable parameters and timer values Sensor Power +12 VDC (+/- 15%) @100 mA max Count Inputs A & B Current Sourcing: 3.9KOhm pull-down, VIN max = 30 VDC Current Sinking: 7.8KOhm pull-up to 12 VDC; ISNK = 1.8 mA max Debounce: 50 Hz max Lo Bias: VIL = 1.5 VDC max., VIH = 3.75 VDC min. Hi Bias: VIL = 5.5 VDC max., VIH = 7.5 VDC min User Inputs Current Sinking: VIL = 1.5 VDC max, 22 KOhm pull-up to 5 VDC Current Sourcing: VIH = 3.5 VDC min., VIN max = 30 VDC; 22 KOhm pulldown Run/Stop Response Time: 250 usec max. User Input Response Time: 5 msec max. Time Accuracy: +/- 0.01% Outputs Solid State: NPN Open Collector- ISNK = 100 mA max. @ VOL = 1.1 VDC max.; VOH = 30 VDC max. Relay: Form A contact, Rating = 5 A @ 250 VAC, 30 VDC (resistive load), 1/10 HP @ 120 VAC (inductive load) Relay Life Expectancy: 100,000 cycles min. at max. load rating Standards Compliance UL & CUL Recognized Electrostatic Discharge: EN 61000-4-2 Electromagnetic RF Fields: EN 61000-4-3 Fast Transients (burst): EN 61000-4-4 RF Conducted Interference: EN 61000-4-6 Simulation of Cordless Phone: ENV 50204 RF Interference: EN 55011 Physical Operating Temperature: 0 C to 50 C (32 F to 122 F) Storage Temperature: -40 C to 70 C (-40 F to 158 F) Humidity: 85% max. relative humidity (non-condensing) from 0 C to 50 C. Altitude: Up to 2000 meters Housing: Black Plastic Electrical Connection: Wire clamping screw terminals Dimensions: 1.95" x 1.95" x 4.54"
This timer features 18 operating modes & 12 timing ranges, measuring from thousandths of a second up to minutes and hours. Timing can be programmed to constantly accumulate or reset with each power cycle. Decimal points separate the different timing units (seconds, minutes, hours) on the display. It accommodates On Delay, Off Delay, Single Shot, & Repetitive Auto Cycling timing modes. It features a Run/Stop Input, and three programmable User Inputs. The push button keys on the front operate programming modes & data values, changing the display, and resetting. Numerical data entry is done by digit entry or automatic scrolling. Run/Stop and User inputs can be sinking (active low) or sourcing (active high) through a single plug jumper. The NPN OC solid state and relay output operates in parallel. The relay output boards are all field replaceable.
|
|
|
|
|
|
|