The MURR DIN 43650 Form A 3124967 with 110V LED and Z Diode suppression has 2 poles + 2 grounds with 18mm pin spacing and 1.5 meters of cable. The 110V AC/DC LED indicator confirms the voltage supply while the Z Diode redirects overvoltage surges. The black plastic housing is flame retardant, and withstands exposure to standard cooling and lubricating agents. Includes connector/cable, integrated gasket & center screw. Rated IP 67 when attached.
Specifications
- Housing- Black Plastic
- Type of Contact- Screw
- Contact Spacing- 18 mm
- Number of Poles- 2 + 2 Ground
- Operating Voltage- 110 V AC/DC
- Operating Current- 1 Amp
- Switch Off Peak- <= 250V
- Drop Off Delay Time- <= 20ms
- Gasket- Integrated
- Temperature Range- -4 F to 176 F
- Diameter of Wires- 3 x 0.75 mm2
- Valve Hold On- <= 100 W (VA)
- LED Color/Current Usage- Yellow / approx 5 mA
- Cable Jacket- Gray PVC
- Cable Outer Diameter- 5.9 mm
- Cable Temperature Range (fixed)- -22 F to 176 F
- Cable Temperature Range (mobile)- 23 F to 158 F
- Protection Class- IP 67 plugged and screwed down (Total protection from dust and temporary submersion in water - 1 meter for up to 30 minutes)
- Circuit Type- LED Indicator + Z Diode
- Cable Length- 1.5 Meter (5')
Murr Elektronik 110V 1.5 Meter EN 175301-803 Form A Connector