 |
 |
 |
|
The Mencom PSDR-75-24 24V DC, 75W DIN-rail power supply has a universal input of 88-264V AC (124-370V DC), with a metal housing. DIN-Rail mounting. UL & CUL listed.
- High efficiency & low power dissipation
- 150% peak load capability
- Short circuit/Overload/Over voltage/Over temperature protection
- Cooling by free air convection
- Can be mounted on DIN rail TS-35/7.5 or 15
- UL 508 approved
- EN61000-6-2 (EN50082-2) industrial immunity level
- 3 Year Manufacturer's Warranty
Mencom PSDR-75-24 24V 75W Power Supply
GENERAL
- Ripple Noise- 100mVp-p
- Efficiency- 89%
- MTBF- Exceed 481,900 hrs (55.77 years)
- Mounting Style- DIN-Rail
- Working Temperature- -22 F to 158 F (-30 C to 70 C)
- Working Humidity- 20% - 95%, Non-condensing
- Storage Temperture- -40 F to 185 F (-40 C to 85 C)
- Storage Humidity- 10-95%
- Housing Dimensions- 125.2mm L x 32mm W x 102mm D
PROTECTION
- Over Voltage Protection- 29-33V DC (Shut down o/p voltage, re-power on to recover)
- Overload Protection- Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage, re-power on to recover. 150%~170% rated power, constant current limiting with auto-recovery within 3 seconds, and then shut down o/p voltage after 3 seconds, re-power on to recover
- Over Temperature Protection- 100 C (+/- 10 C) (Shut down o/p voltage, re-power to recover after temp goes down)
INPUT
- Input Voltage- 88-264V AC (124-370V DC) DC input operation possible by connecting AC/L (+), AC/N (-)
- Frequency Range- 47-63 Hz
- Efficiency- 89%
- AC Current- 1.4A / 115V AC, 0.85A / 230V AC
- Inrush Current- 30A / 115V AC, 50A / 230V AC
- Leakage Current- <1 mA / 240V AC
OUTPUT
- Output Power- 24V DC 75W Single Output
- O/P Rated Current Loading- 3.2A
- O/P Max Current- 3.2A
- Peak Current- 4.69A
- Peak Power- 112.5W (3 Sec)
- Voltage Adj. Range- 24-28V
- Voltage Tolerance- +/- 1%
- Line Regulation- +/- 0.5%
- Load Regulation- +/- 1%
- Setup, Rise Time- 1500ms, 60ms/230V AC, 3000ms, 60ms/115V AC at full load
- Hold Up Time (Typical)- 80ms/230V AC, 20ms/115V AC at full load
APPROVALS
- Safety Standards- UL508, TUV EN60950-1 approved, design refer to GL
- Withstand Voltage- 3KVAC (I/P-O/P), 2KVAC (I/P-Fg), 0.5KVAC (O/P-Fg)
- Isolation Resistance- I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25°C/ 70% RH
- EMC Emission- EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
- EMC Immunity- EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A, SEMI F47 approved
- Vibration- Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes, Mounting: IEC60068-2-6
- MTBF- 481.9K hrs min. MIL-HDBK-217F (25 C)
|
|
|
 |
|
 |
|