|
|
|
|
The Mencom PSDR-240-48 48V DC, 240W DIN-rail power supply has a universal input of 88-264V AC (124-370V DC), with a metal housing. DIN-Rail mounting. UL & CUL listed.
- High efficiency & low power dissipation
- 150% peak load capability
- Built in active PFC function, PF>0.93
- Short circuit/overload/over voltage/over temperature protection
- Cooling by free air convection
- Can in mounted on DIN rail TS-35/7.5 or 15
- UL508 approved
- EN61000-6-2 (EN50082-2) industrial immunity level
- Built-in DC OK relay contact
- 3 Year Manufacturer's Warranty
Mencom PSDR-240-48 48V 240W Power Supply
GENERAL
- Ripple Noise- 120mVp-p
- Efficiency- 94%
- MTBF- Exceed 169,300 hrs (19.59 years)
- Mounting Style- DIN-Rail
- Working Temperature- -13 F to 158 F (-25 C to 70 C)
- Working Humidity- 20% - 95%, Non-condensing
- Storage Temperture- -40 F to 185 F (-40 C to 85 C)
- Storage Humidity- 10-95%
- Housing Dimensions- 125.2mm L x 63mm W x 113.5mm D
PROTECTION
- Over Voltage Protection- 56-65V DC (Shut down o/p voltage, with auto-recovery)
- Overload Protection- Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery. >150% rated power, constant current limiting with auto-recovery within 2 seconds, and may cause to shut down if over 2 seconds
- Over Temperature Protection- 95 C (+/- 5 C) (Shut down o/p voltage, recovers automatically after temp goes down)
FUNCTION
- Dc Ok RealyContact Ratings (Max.)- 60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load
INPUT
- Input Voltage- 88-264V AC (124-370V DC)
- Frequency Range- 47-63 Hz
- Power Factor- 0.93/230V AC, 0.99/115V AC at full load
- Efficiency- 94%
- AC Current- 2.6A/115V AC, 1.3A/230V AC
- Inrush Current- 33A/115V AC, 65A/230V AC
- Leakage Current- <1 mA / 240V AC
OUTPUT
- Output Power- 48V DC 240W Single Output
- O/P Rated Current Loading- 5A
- O/P Max Current- 5A
- Peak Current- 7.5A
- Peak Power- 360W (3 Sec)
- Voltage Adj. Range- 48-55V
- Voltage Tolerance- +/- 1%
- Line Regulation- +/- 0.5%
- Load Regulation- +/- 1%
- Setup, Rise Time- 1500ms, 60ms/230V AC, 3000ms, 60ms/115V AC at full load
- Hold Up Time (Typical)- 20ms/230V AC, 20ms/115V AC at full load
APPROVALS
- Safety Standards- UL508, TUV EN60950-1 approved; (meet EN60204-1)
- Withstand Voltage- 3KVAC (I/P-O/P), 2KVAC (I/P-Fg), 0.5KVAC (O/P-Fg), 0.5KVAC (O/P-Dc Ok)
- Isolation Resistance- I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25°C/ 70% RH
- EMC Emission- EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
- EMC Immunity- EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A, SEMI F47 approved, GL approved
- Vibration- Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes, Mounting: IEC60068-2-6
|
|
|
|
|
|
|