|
|
|
|
The Mencom E45SS-2-TB5-IS entry level serial device server with metal housing & magnetic isolation has one 10/100 RJ45 port and two RS-422/485 five pin terminal blocks. It can withstand the demanding conditions of industrial applications, with support of various protocols and safety approvals. Rated IP30. Also known as Atop SE5002-S55IS
- DIN rail or wall mount
- 2KV magnetic isolation
- 15KV ESD protection for serial signals
- 10/100Mbps Fast Ethernet full duplex auto-negotiation
- Supports multiple link mode with TCP server/client, UDP, & Virtual COM mode
- Monitor, manage, control industrial field devices remotely
- Configuration: Integrated Web Server/Serial Console/Telnet
- Windows Base utility for IP configuration
- Upgrade firmware from remote PC through Ethernets
- Supports auto MDI/MDI-X
- 5 year manufacturer's warranty
ETHERNET
- Compliance- IEEE802.3
- Port- 1
- Transmission Rate- 10/100Mbps Auto-detection
- Connector- RJ45
LINK MODE
- TCP Server- Single connection or Virtual Com mode
- TCP Client- Single destination
- UDP- Up to 4 ranges of IPs
SERIAL
- Interface- RS-422/485 software selectable
- Ports- 2
- Baud Rate- 1200bps-230Kbps
- Parity- None, Odd, Even, Mark, Space
- Data Bits- 7, 8
- Stop Bits- 1, 2
- Flow Control- None, Software: Xon/Xoff, Hardware: RTS/CTS
- Connector- 5 pin 3.81mm terminal block
- Protection- 15KV ESD
POWER REQUIREMENTS
- Input- 9-30V
- Consumption- Max 3W
ENVIRONMENTAL LIMITS
- Operating Temperature- 0 C to 60 C (32 F to 140 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Humidity- 5-95% RH (non-condensing)
SOFTWARE
- Configuration- Web page / Telnet / Serial console / Windows utility
- Virtual Com- Windows port redirection software
- Support Protocol- ICMP, TCP(UDP) / IP, DHCP client, SNMP, SMTP, HTTP, Telnet
APPROVALS
- Safety- EN 60950-1
- EMC- FCC Class A, CE Class A
- EMS- Meets minimal regulatory requirement
- MTBF- 8 years
- IP Protection- IP 30
Mencom Entry Level Serial Server with 5 Pin Terminal Blocks
|
|
|
|
|
|
|