The Red Lion Sixnet
® Series SL-9ES-3STL is an unmanaged 9 port Industrial Ethernet Switch. Housed in a Lexan DIN rail enclosure, this SlimLine SL series switch features 60 km singlemode fiber optic cable with an ST style fiber connector. It is made to provide real-time operation, and is able to work under the demands of industrial applications. The switch has plug and play capability, so is immediately fully functional without requiring a user set-up beforehand. The compact SlimLine housing is uses a minimal amount of space, so it won't take up much room on the DIN-Rail.
PRODUCT FEATURES
- Compact Housing
- Unmanaged Plug & Play Capability
- Full IEEE 802.3 Compliance
- 9 Ports: Eight RJ45 Ports, One Fiber Optic Port
- Extended Environmental Specifications
- -40 C to 60 C Operating Temperature
- >1M+ Hours MTBF
- Supports Full/Half Duplex Operation
- LED Link/Activity Status Indication
- Auto Senses Speed and Flow
- MDIX Auto Sensing Cable
- Redundant Power Inputs (10-30 VDC)
- Power Inputs with Surge Protection
- Lexan DIN-Rail enclosure
- Fast wire-speed switching
- Intelligent routing to prevent collisions
- UL/CSA (CUL), CE & Hazardous Locations (Zone 2), maritime rated
Red Lion Sixnet SL-9ES Series User Manual
SL-9ES-3STL Sixnet 9 Port Ethernet Switch
Ethernet Performance
Unmanaged, Store & Forward Wire Speed Switching
Automatic Learning, Aging, Migration for Addresses
Typical Latency for 10Mbps Ports: 16 us + frame time- varies on load
Typical Latency for 100Mbps Ports: 5 us + frame time- varies on load
Full Duplex Operation w/ Flow Control
MAC Addresses supported: 1024
Memory Bandwidth: 3.2 Gbps
Ethernet Isolation: 1500 VRMS 1 min
Ethernet Ports
Shielded RJ45 Ports: 10/100BaseTX
RJ45 Port Speed Auto-negotiation
RJ45 MDI/MDIX Auto-crossover
Auto-Polarity corrects crossed +/- signals
Fiber Optic Port Speed: 100BaseFX
Fiber Wavelength: 1300 nm center
Fiber Max Distance: 60 KM
Typical Singlemode Fiber: ST
Ethernet Compliance
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
IEEE 802.3u (Fast Ethernet 100Mbps for new devices)
IEEE 802.3x (Full-Duplex with flow control)
Power Input
Typical Input Power: 5 W (all ports active)
Transient Protection: 15,000 watts peak
Spike Protection: 5000 watts (10 times for 10 uS)
Environmental
Operating Temperature: -40 C to 60 C
Storage Temperature: -40 C to 85 C
Humidity (Non-Condensing): 5 to 95% RH
Vibration & Shock: IEC60068-2-6
Standards Compliance
Electrical Safety: UL 508/CSA C22.2/14, EN61010-1, CE
EMC: FCC Part 15, ICES-003, EN55022, EN61000-6, CE
Hazardous Locations: UL 1604/CSA C22.2/213 (Class I, Div 2),
EN60079-15 (Zone 2, Category 3), CE (ATEX)
Maritime: Marine & Offshore per ABS
Eye Safety: IEC60825-1, Class 1; FDA 21 CFR 1040.10
& 1040.11
Physical
DIN-Rail or Panel Mount
Dimensions: 4.2" H x 1.5" W x 3.72" L
Case: UL94V0 Lexan rated IP 40
|