Sealcon CD09A3-BR high quality nickel plated brass cord grips are designed for the toughest applications. Hummel 1.697.0902.01 (insert Hummel 1.089.0902.19). Sold Individually. Locking nut sold separately

Specifications

• Thread Size: PG 9
• Through Hole Diameter: .60" (15.2 mm)
• Body Length: .83" (21 mm)
• Thread Length: .24" (6 mm)
• Wrench Flat Dome: .67" (17 mm)
• Wrench Flat Body: .67" (17 mm)
• Number of Holes: 5
• Hole Diameter: .06" (1.6 mm)

Features

• Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
• Rated IP 65 (NEMA 4x)
• Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
• Flame Protected to UL 94
• Halogen and Phosphorous Free
• Resists salt water, acids, alkalis', gasoline & oils.
• Durable Rugged Construction
• RoHS & Deca BDE, CSA approval

Approvals

• RoHS Compliance
• Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
• Registration, Evaluation, Authorization and Restriction of Chemicals
• Waste Electrical and Electronic Equipment Directive
• UL Registered
• CE
• German Lloyd
• PCT Approval

Sealcon PG 9 Nickel Plated Brass Multi-hole cable glands are used to attach cable or wire to various applications in a wide variety of industries. This strain relief fitting provides a NEMA 4x (IP 65) rating. The cable cannot be less than 80% of the diameter of the hole in order to achieve this rating. There also cannot be more than .04" (1 mm) of difference between the cable's diameter and the diameter of the hole. Testing may be needed to confirm if the NEMA 6 (IP 68) submersible rating is possible. The ACME thread on the CD09A3BR dome top is self locking, ensuring that the overlapping splines apply an even seal. The form seal is then kept from being pulled out of the fitting & provides pull-out protection for your cable so it does not cause damage.

Sealcon CD09A3-BR Brass Dome Strain Relief Fitting