 |
 |
 |
|
The Red Lion PAX2A000 PAX2 series panel meter is a universal analog input panel meter. It features a 2 line, 6/9 digit, Red/Green/Orange LCD display with 1/8 DIN housing. Features built in Modbus communications. The range of functions allows it to cover the needs of different applications. AC/DC powered. It's ideal for industrial or factory automation, process control applications, or other uses that need dual visual parameters. It is able to accommodate DC Current, DC Voltage, Process Signals, Resistance, Thermocouples or RTDs. The universal power input can accept 50 to 250 VAC or 21.6 to 250 VDC.
Features
- Universal Input - DC Current, DC Voltage, Process Signals, Resistance, Thermocouples or RTDs
- Universal Power Supply - 50 to 250 VAC or 21.6 to 250 VDC
- Dual Line, 6/9 Digit Red/Green/Orange LCD Display
- Variable Contrast & Intensity
- Meter Update Rate Up to 160/Second
- Built-In Modbus Communications
- Communications - R232, RS-485, DeviceNet and Profibus (W/Option Card)
- Setpoint & Analog Outputs (w/Option Card)
- Setpoints - Dual & Quad Relay; Quad Sinking & Sourcing
- Built-In USB Port
- NEMA 4X/IP65 - Front Panel
Red Lion PAX2A User Manual
Red Lion PAX2A Installation Instructions
Specifications
Display
Positive Image LCD
Top Line: Six 0.71" digits (Red/Green/Orange), Display Range - 199,999 to 999,999
Lower Line: Nine 0.35" digits (Green), Display Range - 199,999,999 to 999,999,999
Annunciators (Red): 1, 2, 3, & 4
Unit Label: 3 digits programmable (Red/Green/Orange)
Power Requirements
AC Power: 50 to 250 VAC, 50/60 Hz, 20 VA
DC Power: 21.6 to 250 VDC, 8 W
Memory
Nonvolatile E2PROM memory retains programmable parameters & display values
Input Capabilities
Current Input: +/- 250 uADC, +/- 2.5 mADC, +/- 25 mADC, +/- 250 mADC, and +/- 2 DC
Voltage Input: +/- 250 mVDC, +/- 2.0 VDC, +/- 10 VDC, +/- 25 VDC, +/- 100 ADC, and +/- 200 VDC
Thermocouple Input: T, E, J, K, R, S, B, N, and C
RTD Input: 100Ohm Pt (Alpha 0.00385 and 0.00392 120Ohm Nickel (Alpha 0.00672) and 10Ohm Copper (Alpha 0.00427)
Resistance Input: 100Ohm, 1,000Ohm, and 10 KOhm
Totalizer
Time Base: second, minute, hour or day
Batch: Can accumulate (gate) input display from a user input
Time Accuracy: 0.01% typical
Decimal Point: 0 to 0.0000
Scale Factor: 0.001 to 65.000
Low Signal Cut-out: -19,999 to 99,999
Total: 9 digits, display alternates between high order and low order readouts
Excitation Power
Jumper selectable
Transmitter Power: +18VDC @ 50mA
Reference Voltage: +2VDC, +/- 2%
Reference Current: 1 mADC, +/- 2%
Custom Linearization
Data Point Pairs: Selectable from 2 to 16
Display Range: -19,999 to 99,999
Decimal Point: 0 to 0.0000
Ice Point Compensation: user value (0.00 to 650.00 uV/C)
Standards Compliance
CE Approved
EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
IEC/EN 61010-1
RoHS Compliant
UL Listed: File #E179259
Type 4X Indoor Enclosure rating (Face only)
IP65 Enclosure rating (Face only)
IP20 Enclosure rating (Rear of unit)
Physical
Operating Temperature: 0 C to 50 C (32 F to 122 F), 0 C to 45 C with plug in cards installed
Storage Temperature: -40 C to 60 C (-40 F to 140 F)
Humidity: 85% max. relative humidity (non-condensing)
Altitude: Up to 2000 meters
Construction: NEMA 4X/IP65 indoor use, IP20 Touch Safe, Installation Category II,
Pollution Degree 2, One piece bezel/case; flame resistant; Synthetic rubber keypad; panel gasket & mounting clip
Connection: High Compression Cage-Clamp Terminal Block
Dimensions: 1.95" x 3.8" x 4.24"
PAX2A000 Red Lion PAX2 Series Panel Meter
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
The LCD display has a 6 digit, 0.7" top line that can be set to display in red, green, or orange. Colors on the display can be set to change with certain setpoints, to provide a quick indication of the current status. The lower line has a 9 digit, 0.35" display that shows a green readout. Either line is able to show the input, total, minimum, maximum, or set points. The LCD display also has a 3 digit indicator that can be set to show a specific unit. There are 4 keys on the front panel, with 2 of them being programmable function keys. The 24 bit resolution A/D converter has a programmable rate of 5 to 160 readings/second.
|
|
|
|
|
|
|